The photocatalytic degradation has been considered to be an efficient process for the degradation of organic pollutants, which are present in the effluents released by industries. The photocatalytic bleaching of cationic dye methylene blue was carried out spectrometrically on irradiation of UV light using Cu(II), Ni(II), and Co(II) complexes of (2E)-2-[(2E)-3-phenylprop-2-en-1-ylidene]hydrazinecarbothioamide (HL). The effects of pH and metal ion were studied on the efficiency of the reaction. Cu(II) complex shows better catalytic activity and the highest percentage degradation (~88.8%) of methylene blue was observed at pH 12. A tentative mechanism has also been proposed for the photocatalytic degradation of methylene blue.

Catalysts with a single atom site allow highly tuning of the activity, stability, and reactivity of heterogeneous catalysts. Therefore, atomistic understanding of the pertinent mechanism is essential to simultaneously boost the intrinsic activity, site density, electron transport, and stability. Here, we report that atomically dispersed nickel (Ni) in zincblende cadmium-zinc sulfide quantum dots (ZCS QDs) delivers an efficient and durable photocatalytic performance for water splitting under sunlight. The finely tuned Ni atoms dispersed in ZCS QDs exhibit an ultrahigh photocatalytic H2 production activity of 18.87 mmol hour-1 g-1. It could be ascribed to the favorable surface engineering to achieve highly active sites of monovalent Ni(I) and the surface heterojunctions to reinforce the carrier separation owing to the suitable energy band structures, built-in electric field, and optimized surface H2 adsorption thermodynamics. This work demonstrates a synergistic regulation of the physicochemical properties of QDs for high-efficiency photocatalytic H2 production.

Aryl chlorides are among the most versatile synthetic precursors, and yet inexpensive and benign chlorination techniques to produce them are underdeveloped. We propose a process to generate aryl chlorides by chloro-group transfer from chlorophenol pollutants to arenes during their mineralization, catalyzed by Cu(NO3)2/NaNO3 under aerobic conditions. A wide range of arene substrates have been chlorinated using this process. Mechanistic studies show that the Cu catalyst acts in cooperation with NOx species generated from the decomposition of NaNO3 to regulate the formation of chlorine radicals that mediate the chlorination of arenes together with the mineralization of chlorophenol. The selective formation of aryl chlorides with the concomitant degradation of toxic chlorophenol pollutants represents a new approach in environmental pollutant detoxication. A reduction in the use of traditional chlorination reagents provides another (indirect) benefit of this procedure.

The present work explores the structural, microstructural, optical, magnetic, and hyperfine properties of Co0.3Zn0.7Fe2O4 microspheres, which have been synthesized by a novel template-free solvothermal method. Powder X-ray diffraction, electron microscopic, and Fourier transform infrared spectroscopic techniques were employed to thoroughly investigate the structural and microstructural properties of Co0.3Zn0.7Fe2O4 microspheres. The results revealed that the microspheres (average diameter ∼121 nm) have been formed by self-assembly of nanoparticles with an average particle size of ∼12 nm. UV-vis diffuse reflectance spectroscopic and photoluminescence studies have been performed to study the optical properties of the sample. The studies indicate that Co0.3Zn0.7Fe2O4 microspheres exhibit a lower band gap value and enhanced PL intensity compared to their nanoparticle counterpart. The outcomes of dc magnetic measurement and Mössbauer spectroscopic study confirm that the sample is ferrimagnetic in nature. The values of saturation magnetization are 76 and 116 emu g-1 at 300 and 5 K, respectively, which are substantially larger than its nanosized counterpart. The infield Mössbauer spectroscopic study and Rietveld analysis of the PXRD pattern reveal that Fe3+ ions have migrated from [B] to (A) sites resulting in the cation distribution: (Zn2+ 0.46Fe3+ 0.54)A[Zn2+ 0.24Co2+ 0.3Fe3+ 1.46]BO4. Comparison of electrochemical performance of the Co0.3Zn0.7Fe2O4 microspheres to that of the Co0.3Zn0.7Fe2O4 nanoparticles reveals that the former displays greater specific capacitance (149.13 F g-1) than the latter (80.06 F g-1) due to its self-assembled porous structure. Moreover, it was found that Co0.3Zn0.7Fe2O4 microspheres possess a better electrochemical response toward H2O2 sensing than Co0.3Zn0.7Fe2O4 nanoparticles in a wide linear range.

Polydopamine (PDA) is an emerging nature-inspired biopolymer material that possesses many interesting properties including self-assembly and universal adhesion. PDA is also able to form coordination bonds with various metal ions, which can be reduced to metal nanoparticles (NPs) as a result of thermal annealing under protective environment. In this study, PDA has been utilized as a support material to synthesize Pt NPs in an aqueous solution at room temperature. The catalytic performance of the resulting PDA-Pt nanocomposite was evaluated using an electrochemical workstation which showed comparable activity to Pt/C material for hydrogen evolution reaction (HER). Furthermore, Cu, Ni, and Cu-Ni NPs supported on PDA were also obtained using this strategy with assistance of subsequent thermal annealing. The phase evolution of the NPs was studied by in-situ X-ray diffraction while the morphology of the nanoparticles was investigated using electron microscopic techniques. Preliminary results showed the NPs supported on PDA also possessed HER activity. This work demonstrates that PDA can be utilized as a potential support for synthesis of metal NPs that can be exploited in engineering applications such as catalysts.

Incorporation of bioactive natural compounds like polyphenols is an attractive approach for enhanced functionalities of biomaterials. In particular flavonoids have important pharmacological activities, and controlled release systems may be instrumental to realize the full potential of these phytochemicals. Alginate presents interesting attributes for dermal and other biomaterial applications, and studies were carried here to support the development of polyphenol-loaded alginate systems. Studies of capillary viscosity indicated that ionic medium is an effective strategy to modulate the polyelectrolyte effect and viscosity properties of alginates. On gelation, considerable differences were observed between alginate gels produced with Ca2+, Ba2+, Cu2+, Fe2+, Fe3+ and Zn2+ as crosslinkers, especially concerning shrinkage and morphological regularity. Stability assays with different polyphenols in the presence of alginate-gelling cations pointed to the choice of calcium, barium and zinc as safer crosslinkers. Alginate-based films loaded with epicatechin were prepared and the kinetics of release of the flavonoid investigated. The results with calcium, barium and zinc alginate matrices indicated that the release dynamics is dependent on film thicknesses, but also on the crosslinking metal used. On these grounds, an alginate-based system of convenient use was devised, so that flavonoids can be easily loaded at simple point-of-care conditions before dermal application. This epicatechin-loaded patch was tested on an ex-vivo skin model and demonstrated capacity to deliver therapeutically relevant concentrations on skin surface. Moreover, the flavonoid released was not modified and retained full antioxidant bioactivity. The alginate-based system proposed offers a multifunctional approach for flavonoid controllable delivery and protection of skin injured or under risk.

Deep eutectic solvents (DESs) were used as alternatives to the aqueous phase in solvent extraction of iron(iii), zinc(ii) and lead(ii). The selective extraction of iron(iii) and zinc(ii) was studied from a feed of ethaline (1 : 2 molar ratio of choline chloride : ethylene glycol) and lactiline (1 : 2 molar ratio of choline chloride : lactic acid), with the former DES being more selective. A commercial mixture of trialkylphosphine oxides (Cyanex 923, C923) diluted in an aliphatic diluent selectively extracted iron(iii) from a feed containing also zinc(ii) and lead(ii). The subsequent separation of zinc(ii) from lead(ii) was carried out using the basic extractant Aliquat 336 (A336). The equilibration time and the extractant concentration were optimized for both systems. Iron(iii) and zinc(ii) were stripped using 1.2 mol L-1 oxalic acid and 0.5 mol L-1 aqueous ammonia, respectively. An efficient solvometallurgical flowsheet is proposed for the separation and recovery of iron(iii), lead(ii) and zinc(ii) from ethaline using commercial extractants. Moreover, the process was upscaled in a countercurrent mixer-settler set-up resulting in successful separation and purification.

Two chalcogenated ligands L1 and L2 containing anthracene core and amine functionality have been synthesized. Both the ligands have been characterized using 1H and 13C{1H} NMR techniques. The structure of L1 has also been corroborated by single crystal X-ray diffraction. Application of L1 and L2 as stabilizers for palladium nano-particles (NPs) has been explored and six different types of NPs 1-6 have been prepared by varying the quantity of stabilizer. The nano-particles have been characterized by PXRD, EDX, and HRTEM techniques. The size of NPs has been found to be in the range of ∼1-2 nm, 2-3 nm, 4-6 nm, 1-2 nm, 1-2 nm and 3-5 nm for 1-6 respectively. The catalytic activities of 1-6 have been explored for Suzuki-Miyaura coupling of phenyl boronic acid with various aryl halides. These NPs showed good catalytic activity for various aryl chlorides/bromides at low catalyst loading (5 mg). Among 1-6, the highest activity has been observed for NPs 1, probably due to their relatively small size and high uniformity in the dispersion. The recyclability of the NPs upto 5 catalytic cycles is a distinct advantage.

The grafting of drugs to the single-walled carbon nanotube (SWCNT) was attained by the initial conversion of carboxylic groups in SWCNT to corresponding acyl chlorides. The active acyl chlorides in SWCNT were subsequently mixed with chemotherapeutic agents having NH, NH2, and OH functional groups to afford the formation of relevant amide and ester, respectively. The covalently grafted drugs to SWCNT were identified by infrared and UV-visible spectroscopy and transmission electron microscopy methods. From a clinical aspect, the grafting of drugs to the SWCNT can be used as a new tool and useful method for potential drug delivery in patients.

In the present paper, we show that pineal hormone melatonin interacts with purified cell nuclei from rat spleen and thymus. Binding of 2-[125I]iodomelatonin ([125I]melatonin) by cell nuclei fulfills all criteria for binding to a receptor site. Binding exhibited properties such as dependence on time and temperature as well as reversibility, saturability, high affinity, and specificity. Results suggested binding to single classes of binding sites. The dissociation constants (Kd) for the binding sites in the spleen and thymus nuclei were 68 and 102 pM, respectively. These data are in close agreement with data obtained from kinetic studies, in which the kinetically derived values of the dissociation constant in the spleen and thymus nuclei were 166 and 537 pM, respectively. The affinities for melatonin of these nuclear binding sites suggest that they may recognize the physiological concentrations of melatonin in the tissues. Finally, we have demonstrated that binding of [125I]melatonin by the nuclei is displaced by CGP 52608, a specific ligand of the putative nuclear melatonin receptor RZR/ROR. Results strongly suggest that in addition to membrane receptor-related mechanisms, nuclear receptors may be involved in the regulation of immune system by melatonin.

Macrocyclic diterpenes were previously found to be able to modulate the efflux pump activity of Candida albicans multidrug transporters. Most of these compounds were jatrophanes, but only a few number of lathyrane-type diterpenes was evaluated. Therefore, the aim of this study was to evaluate the ability of nineteen structurally-related lathyrane diterpenes (1-19) to overcome the drug-efflux activity of Cdr1p and Mdr1p transporters of C. albicans, and get some insights on their structure-activity relationships. The transport assay was performed by monitoring Nile Red (NR) efflux in a Saccharomyces cerevisiae strain overexpressing the referred efflux pumps from C. albicans. Moreover, a chemosensitization assay was performed in order to evaluate the type of interaction between the inhibitory compounds and the antifungal drug fluconazole. Compounds 1-13 were previously isolated from Euphorbia boetica or obtained by derivatization, and compounds 14-19 were prepared by chemical transformations of compound 4. In the transport assays, compounds 14-19 revealed the strongest inhibitory activity of the Cdr1p efflux pump, ranging from 65 to 85%. Concerning Mdr1p efflux pump, the most active compounds were 1, 3, 6, 8, and 12 (75-85%). When used in combination with fluconazole, epoxyboetirane K (2) and euphoboetirane N (18) revealed synergistic effects in the AD-CDR1 yeast strain, overexpressing the Cdr1p transporter, through their ability to reduce the effective concentration of the antifungal drug by 23- and 52-fold, respectively.

Cu/ligand-mediated coupling reactions have been widely investigated in the recent past. However, activation of cheaper aryl chlorides is still a great limitation of these reactions. During the course of present investigations efforts have been made to develop a normal and facile CuI/ligand pair protocol for arylation of phthalimide using aryl chlorides. The protocol has also been extended for arylation of amines. On the basis of experimental and theoretical results, a catalytic cycle has also been proposed and it has been established that these reactions follow oxidative addition-reductive elimination (OA-RE) pathway. These studies have indicated that tetracoordinated [Cu(L1)(L2)]+ complex is active catalytic species in these reactions.

A new ruthenium ion imprinted polymer was prepared from the Ru(III) 2-thiobarbituric acid complex (the template), methacrylic acid or acrylamide (the functional monomers), and ethylene glycol dimethacrylate (the cross-linking agent) using 2,2'-azobisisobutyronitrile as the radical initiator. The ion imprinted polymer was characterized and used as a selective sorbent for the solid phase extraction of Ru(III) ions. The effects of type of functional monomer, sample volume, solution pH and flow rate on the extraction efficiency were studied in the dynamic mode. Ru(III) ion was quantitatively retained on the sorbents in the pH range from 3.5 to 10, and can be eluted with 4 mol L-1 aqueous ammonia. The affinity of Ru(III) for the ion imprinted polymer based on the acrylamide monomer is weaker than that for the polymer based on the methacrylic acid monomer, which therefore was used in interference studies and in analytical applications. Following extraction of Ru(III) ions with the imprint and their subsequent elution from the polymer with aqueous ammonia, Ru(III) was detected by electrothermal atomic absorption spectrometry with a detection limit of 0.21 ng mL-1. The method was successfully applied to the determination of trace amounts of Ru(III) in water, waste, road dust and platinum ore (CRM SARM 76) with a reproducibility (expressed as RSD) below 6.4 %. FigureThe new ion imprinted polymer was prepared and used for the separation of ruthenium from water and most complex environmental samples, such as road dust and platinum ore (CRM SARM 76) prior ETAAS determination.

In this work, lemon and onion biomasses commonly found in street markets are for the first time used to develop a facile, fast and low-cost one-step microwave-assisted carbonization method for synthesis of highly fluorescent carbon dots (CDs). The structure and optical properties of CDs were investigated by TEM, XRD, XRF, UV-Vis, FTIR, and fluorescence spectroscopy. CDs displayed satisfactory optical proprieties, a high quantum yield of 23.6%, and excellent water solubility, and the particle size was 4.23-8.22 nm with an average diameter of 6.15 nm. An efficient fluorescent resonance energy transfer (FRET) between the CDs and riboflavin was achieved with CDs acting as donor and riboflavin as acceptor. A linear relationship between FRET and the riboflavin concentration from 0.10 to 3.0 μg/mL was observed, allowing the development of an accurate and fast analytical method to determine this vitamin in multivitamin/mineral supplements. Despite the potential interferences in these supplements, CDs were selective for riboflavin under optimized conditions. A paired t-test at a 95% confidence level indicated no statistically significant difference between the proposed and the reference methods. Recovery test presented values ranged from 96.0% to 101.4%. The limit of detection and relative standard deviation were estimated at 1.0 ng/mL and <2.6% (n = 3), respectively. CDs were successfully synthesized in a domestic microwave oven (1450 W, 6 min), presenting satisfactory parameters when compared with results of other studies reported in the literature, suggesting that the proposed method is a potentially useful method for the synthesis of CDs and determination of riboflavin.

Photodegradable polyesters were synthesized with a photolabile monomer 2-nitrophenylethylene glycol and dioyl chlorides with different lengths. These polymers can be assembled to form polymeric particles with encapsulation of target substances. Light activation can degrade these particles and release payloads in both aqueous solutions and RAW 264.7 cells.

The main mechanism of toxicity for fast-dissolving nanoparticles (NPs) is relatively simple as it originates from the intrinsic toxicity of their constituent elements rather than complicated surface reactivity. However, there is little information about the compared toxicity of fast-dissolving NP and its constituent ion, which is essential for understanding the mechanism of NP toxicity and the development of a structure-toxicity relationship (STR) model. Herein, we selected three types of fast-dissolving metal-oxide NPs (CoO, CuO, and ZnO) and constituent metal chlorides (CoCl2, CuCl2, and ZnCl2) to compare dose-response curves between NP and its constituent metal. These materials were treated relevant cell lines for inhalation setting (i.e., differentiated THP-1 cells for macrophages and A549 cells for alveolar epithelial cells) and cytotoxicity as an endpoint was evaluated at 24 h post-incubation. The results showed that CoO and CuO NPs in both cell types showed similar patterns of dose-response curves and cytotoxic potential compared to that of their respective metal chloride. On the other hand, ZnO NPs in both cell types showed a completely different dose-response curve compared to that of ZnCl2: ZnO NPs showed modest slope and much less potential for cytotoxicity compared to that of ZnCl2. These results imply that fast-dissolving metal-oxide NPs are not always have similar dose-response curves and toxic potentials compared to their constituent metal chlorides and this may be due to the differential mechanism of intracellular uptake of these substances and their interaction with intracellular detoxification molecules. Further investigations are needed for the use of toxic potential of metal ions as a predicting factors of fast-dissolving NPs toxicity. In addition, chelating agent specific for dissolved metal ions can be applied for the treatment of these fast-dissolving NPs.

In recent years, rare earth doped upconversion nanocrystals have been widely used in different fields owing to their unique merits. Although rare earth chlorides and trifluoroacetates are commonly used precursors for the synthesis of nanocrystals, they have certain disadvantages. For example, rare earth chlorides are expensive and rare earth trifluoroacetates produce toxic gases during the reaction. To overcome these drawbacks, we use the less expensive rare earth hydroxide as a precursor to synthesize β-NaYF₄ nanoparticles with multiform shapes and sizes. Small-sized nanocrystals (15 nm) can be obtained by precisely controlling the synthesis conditions. Compared with the previous methods, the current method is more facile and has lower cost. In addition, the defects of the nanocrystal surface are reduced through constructing core⁻shell structures, resulting in enhanced upconversion luminescence intensity.

Herein, novel hybrid compounds of celecoxib and 2-aminoanthraquinone derivatives have been synthesized using condensation reactions of celecoxib with 2-aminoanthraquinone derivatives or 2-aminoanthraquinon with celecoxib derivatives. Celecoxib was reacted with different acid chlorides, 2-chloroethylisocyanate and bis (2-chloroethyl) amine hydrochloride. These intermediates were then reacted with 2-aminoanthraquinone. Also the same different acid chlorides and 2-chloroethylisocyanate were reacted with 2-aminoanthraquinone and the resulting intermediates were reacted with celecoxib to give isomers for the previous compounds. The antitumor activities against hepatic carcinoma tumor cell line (HEPG2) have been investigated in vitro, and all these compounds showed promising activities, especially compound 3c, 7, and 12. Flexible docking studies involving AutoDock 4.2 was investigated to identify the potential binding affinities and the mode of interaction of the hybrid compounds into two protein tyrosine kinases namely, SRC (Pp60v-src) and platelet-derived growth factor receptor, PDGFR (c-Kit). The compounds in this study have a preferential affinity for the c-Kit PDGFR PTK over the non-receptor tyrosine kinase SRC (Pp60v-src).

Excessive aggregation of β-amyloid peptides (Aβ) is regarded as the hallmark of Alzheimer's disease. Exploring the underlying mechanism regulating Aβ aggregation remains challenging and investigating aggregation events of Aβ in the presence and absence of metallic ions at molecular level would be meaningful in elucidating the role of metal cations on interactions between Aβ molecules. In this study, chemical self-assembled monolayer (SAM) method was employed to fabricate monolayer of β-amyloid peptides Aβ42 on gold substrate with a bolaamphiphile named 16-Mercaptohexadecanoic acid (MHA). Firstly, the samples of gold substrate (blank control), the MHA-modified substrate, and the Aβ42-modified substrate were detected by X-ray photoelectron spectroscopy (XPS) to track the self-assembly process. Aggregation behaviors of Aβ42 before and after metallic ions (Zn2+, Ca2+, Al3+) treatment were monitored by atomic force microscopy (AFM) and the interaction between Aβ42 and metallic ions (Zn2+, Ca2+, Al3+) was investigated by surface-enhanced Raman Scattering (SERS).

The study of drugs diffusion through different biological membranes constitutes an essential step in the development of new pharmaceuticals. In this study, the method based on the monolayer cell culture of CHO-K1 cells has been developed in order to emulate the epithelial cells barrier in permeability studies by laser interferometry. Laser interferometry was employed for the experimental analysis of nickel(II) and cobalt(II) complexes with 1-allylimidazole or their chlorides' diffusion through eukaryotic cell monolayers. The amount (mol) of nickel(II) and cobalt(II) chlorides transported through the monolayer was greater than that of metals complexed with 1-allylimidazole by 4.34-fold and 1.45-fold, respectively, after 60 min. Thus, laser interferometry can be used for the quantitative analysis of the transport of compounds through eukaryotic cell monolayers, and the resulting parameters can be used to formulate a mathematical description of this process.