This study investigated the chemical composition changes of Salvia plebeia R.Br. cultivated under different light sources, including florescent light and sunlight. The plants were exposed to fluorescent light for four months and sunlight and then examined for the next 5-7 months. Plants were harvested monthly during the seven months, and we examined whether the difference in light source affected the phenolic and flavonoid contents and antioxidant activity. A simple and reliable HPLC method using a PAH C18 column was applied for the quantitative analysis of two triterpenoids from the S. plebeia groups. Oleanolic acid (OA) and ursolic acid (UA) showed good linearity (R² > 0.9999) within the test ranges (0.005-0.05 mg/mL), and the average percentage recoveries of the OA and UA were 95.1-104.8% and 97.2-107.1%, respectively. The intra- and inter-day relative standard deviations (RSDs) were less than 2.0%. After exposure to sunlight, the phenolic contents, including rosmarinic acid, showed a reduced tendency, whereas the flavonoid contents, including homoplantaginin and luteolin 7-glucoside, were increased. The content of the triterpenoids also showed an increased tendency under sunlight irradiation, but the variance was not larger than those of the phenolic and flavonoid contents. Among experimental groups, the group harvested at six months, having been exposed to sunlight for two months, showed the most potent antioxidant activity. Therefore, these results showed that the chemical composition and antioxidant activities of S. plebeia R.Br. was affected from environmental culture conditions, such as light source. Our studies will be useful for the development of functional materials using S. plebeia R.Br.

The well-defined heterostructure of the photocathode is desirable for photoelectrochemically producing hydrogen from aqueous solutions. Herein, enhanced heterostructures were fabricated based on typical stable covalent organic framework (TpPa-1) films and TiO2 nanotube arrays (NTAs) as a proof-of-concept model to tune the photoelectrochemical (PEC) hydrogen generation by tailoring the photoelectrode microstructure and interfacial charge transport. Ultrathin TpPa-1 films were uniformly grown on the surface of TiO2 NTAs via a solvothermal condensation of building blocks by tuning the monomer concentration. The Pt1@TpPa-1/TiO2-NTAs photoelectrode with single-atom Pt1 as a co-catalyst demonstrated improved visible-light response, enhanced photoconductance, lower onset potential, and decreased Tafel slope value for hydrogen evolution. The hydrogen evolution rate of the Pt1@TpPa-1/TiO2-NTAs photoelectrode was five times that of Pt1@TpPa-1 under AM 1.5 simulated sunlight irradiation and the bias voltage of 0 V. A lower overpotential was recorded as 77 mV@10 mA cm-2 and a higher photocurrent density as 1.63 mA cm-2. The hydrogen evolution performance of Pt1@TpPa-1/TiO2-NTAs photoelectrodes may benefit from the well-matched band structures, effective charge separation, lower interfacial resistance, abundant interfacial microstructural sites, and surficial hydrophilicity. This work may raise a promising way to design an efficient PEC system for hydrogen evolution by tuning well-defined heterojunctions and interfacial microstructures.

We developed a photocatalytic solar tower reactor for the elimination of low concentrations of volatile organic compounds (VOCs) typically emitted from small industrial establishments. The photocatalytic system can be installed in a narrow space, as the reactor is cylindrical-shaped. The photocatalytic reactor was placed vertically in the center of a cylindrical scattering mirror, and this vertical reactor was irradiated with scattered sunlight generated by the scattering mirror. About 5 ppm toluene vapor, used as representative VOC, was continuously photodegraded and converted to CO2 almost stoichiometrically under sunny conditions. Toluene removal depended only on the intensity of sunlight. The performance of the solar tower reactor did not decrease with half a year of operation, and the average toluene removal was 36% within this period.

The aim of the study was to assess the effects of Melittis melissophyllum shading on its development and accumulation of phenolics. Their content (verbascoside, apiin, luteolin-7-O-glucoside, coumarin, 3,4-dihydroxycoumarin, o-coumaric acid 2-O-glucoside as well as o-coumaric, p-coumaric, chlorogenic, caffeic, ferulic and cichoric acid) was determined in the herb using HPLC-DAD. The results showed that the content of abovementioned flavonoids and phenolic acids was highest in plants grown under full sunlight. On the other hand, a higher content of coumarin was observed in shaded plants, especially after the seed-setting stage. A similar tendency was noted for the amount of chlorophyll a and b. The content of hydrogen peroxide and malondialdehyde, the activity of polyphenol oxidase and catalase and the antioxidant capacity of plant extracts (measured using DPPH, ABTS and FRAP assays) were found to be the highest in the plants grown in full sunlight. However, the plants grown in moderate (30%) shade were found to thrive best.

Pyrite has been used in photo-Fenton reactions for the degradation of pollutants, but the application of photo-Fenton processes with extra H2O2 in real water/wastewater treatment has still been limited by the economic cost of H2O2 and artificial light sources. Herein, citric acid (CA) and simulated/natural sunlight are used to develop a pyrite-based photo-Fenton system (pyrite-CA-light) in situ generating H2O2 through the enhanced activation of molecular oxygen. The degradation of pharmaceuticals and personal care products (PPCPs), especially acetaminophen (APAP) as the main target pollutant, in the pyrite-CA-light system was investigated. The effects of influencing factors such as various organic acids, APAP concentration, pH, pyrite dosage, CA concentration and co-existing anions (HCO3-, Cl-, NO3-, SO42- and H2PO4-) were examined. At a pyrite dosage of 0.1 g L-1, CA concentration of 0.6 mM and an initial pH of 6.0, the degradation efficiency of APAP (30 μM) was 99.1% within 30 min under the irradiation of xenon lamp (70 W, λ ≥ 350 nm). Almost the same high efficiency of APAP degradation (93.9%) in the system was achieved under natural sunlight irradiation (ca. 650 W m-2). The scavenging experiments revealed that the dominant active species for degrading APAP was hydroxyl radical (HO•). Moreover, a quantitative structural-activity relationship (QSAR) model for pseudo-first-order rate constants (kobs) was established with a high significance (R2 = 0.932, p = 0.001) by using three descriptors: octanol-water partition coefficient (logKow), dissociation constant (pKa) and highest occupied molecular orbital (HOMO). This work provides an innovative strategy of the photo-Fenton process for the degradation of PPCPs using natural minerals and ordinary carboxylic acid under sunlight.

The explosive 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) is of particular interest due to its extreme insensitivity to impact, shock and heat, while providing a good detonation velocity. To determine its fate under environmental conditions, TATB powder was irradiated with simulated sunlight and, in water, under UV light at 254 nm. The hydrolysis of particles submerged in neutral and alkaline solutions was also examined. We found that, by changing experimental conditions (e.g., light source, and mass and physical state of TATB), the intermediates and final products were slightly different. Mono-benzofurazan was the major transformation product in both irradiation systems. Two minor transformation products, the aci-nitro form of TATB and 3,5-diamino-2,4,6-trinitrophenol, were detected under solar light, while 1,3,5-triamino-2-nitroso-4,6-dinitrobenzene, 1,3,5-triamino-2,4-dinitrobenzene and mono-benzofuroxan were produced under UV light. The product identified as 3,5-diamino-2,4,6-trinitrophenol was identical to the one formed in the dark under alkaline conditions (pH 13) and in water incubated at either 50 °C or aged at ambient conditions. Interestingly, when only a few milligrams of TATB were irradiated with simulated sunlight, the aci-isomer and mono-benzofurazan derivative were detected; however, the hydrolysis product 3,5-diamino-2,4,6-trinitrophenol formed only much later in the absence of light. This suggests that the water released from TATB to form mono-benzofurazan was trapped in the interstitial space between the TATB layers and slowly hydrolyzed the relatively stable aci-nitro intermediate to 3,5-diamino-2,4,6-trinitrophenol. This environmentally relevant discovery provides data on the fate of TATB in surface environments exposed to sunlight, which can transform the insoluble substrate into more soluble and corrosive derivatives, such as 3,5-diamino-2,4,6-trinitrophenol, and that some hydrolytic transformation can continue even without light.

Two new 2-(2´-hydroxyaryl)benzotriazole derivatives were synthesized and studied by photophysical and photochemical techniques in order to assess their ability to act as UV-filters. The absorption and emission properties of both compounds were determined in solvents of different polarity. In non polar solvent, a photoinduced excited state intramolecular proton transfer was established leading to efficient non radiative dissipation of UV-energy. In addition, the compounds considered were photostable under irradiation with simulated sunlight.

Se4+ and N3- ions were used as codopants to enhance the photocatalytic activity of TiO₂ under sunlight irradiation. The Se/N codoped photocatalysts were prepared through a simple wet-impregnation method followed by heat treatment using SeCl₄ and urea as the dopant sources. The prepared photocatalysts were well characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-diffuse reflectance spectroscopy (UV-DRS), scanning electron microscopy (SEM) and Raman spectroscopy. The codoped samples showed photoabsorption in the visible light range from 430 nm extending up to 580 nm. The photocatalytic activity of the Se/N codoped photocatalysts was evaluated by degradation of 4-nitrophenol (4-NP). The degradation of 4-NP was highly increased for the Se/N codoped samples compared to the undoped and single doped samples under both UV-A and sunlight irradiation. Aiming to determine the electronic structure and dopant locations, quantum chemical modeling of the undoped and Se/N codoped anatase clusters was performed using Density Functional Theory (DFT) calculations with the hybrid functional (B3LYP) and double-zeta (LanL2DZ) basis set. The results revealed that Se/N codoping of TiO₂ reduces the band gap due to mixing of N2p with O2p orbitals in the valence band and also introduces additional electronic states originating from Se3p orbitals in the band gap.

Efficient and excellent nanoparticles are required for the degradation of organic dyes in photocatalysis. In this study, silver-manganese oxide nanoparticles (Ag-Mn-NPs) were synthesized through a wet chemical precipitation method and characterized as an advanced catalyst that has enhanced photocatalytic activity under sunlight irradiation. The nanoparticles were characterized using scanning electron microscopy (SEM), XRD, UV-vis light spectra, and energy-dispersive X-ray (EDX) spectroscopy, revealing their spherical and agglomerated form. The EDX spectra confirmed the composition of the nanoparticles, indicating their presence in oxide form. These bimetallic oxide nanoparticles were employed as photocatalysts for the degradation of malachite green (MG) dye under sunlight irradiation in an aqueous medium. The study investigated the effects of various parameters, such as irradiation time, catalyst dosage, recovered catalyst dosage, dye concentration, and pH, on the dye's photodegradation. The results showed that Ag-Mn oxide nanoparticles exhibited high photocatalytic activity, degrading 92% of the dye in 100 min. A longer irradiation time led to increased dye degradation. Moreover, a higher catalyst dosage resulted in a higher dye degradation percentage, with 91% degradation achieved using 0.0017 g of the photocatalyst in 60 min. Increasing the pH of the medium also enhanced the dye degradation, with 99% degradation achieved at pH 10 in 60 min. However, the photodegradation rate decreased with increasing dye concentration. The Ag-Mn oxide nanoparticles demonstrate excellent potential as a reliable visible-light-responsive photocatalyst for the efficient degradation of organic pollutants in wastewater treatment.

Nanotechnology is playing a critical role in several essential technologies with nanoscale structures (nanoparticles) in areas of the environment and biomedicine. In this work, the leaf extract of Pluchea indica was utilized to biosynthesize zinc oxide nanoparticles (ZnONPs) for the first time and evaluated for antimicrobial and photocatalytic activities. Different experimental methods were used to characterize the biosynthesized ZnONPs. The biosynthesized ZnONPs showed maximum Ultraviolet-visible spectroscopy (UV-vis) absorbance at a wavelength of 360 nm. The X-Ray diffraction (XRD) pattern of the ZnONPs exhibits seven strong reflection peaks, and the average particle size was 21.9 nm. Fourier-transform infrared spectroscopy (FT-IR) spectrum analysis reveals the presence of functional groups that help in biofabrication. The existence of Zn and O was confirmed by the Energy-dispersive X-ray (EDX) spectrum and the morphology by SEM images. Antimicrobial studies showed that the biosynthesized ZnONPs have antimicrobial efficacy against Escherichia coli, Pseudomonas aeruginosa, Enterococcus faecalis, Bacillus subtilis, Staphylococcus aureus, Candida albicans and Cryptococcus neoformans where inhibition zones at concentration 1000 µg/mL were 21.83 ± 0.76, 13.0 ± 1.1, 14.9 ± 0.85, 24.26 ± 1.1, 17.0 ± 1.0, 20.67 ± 0.57 and 19.0 ± 1.0 mm respectively. Under both dark and sunlight irradiation, the photocatalytic activity of ZnONPs was evaluated towards the degradation of the thiazine dye (methylene blue-MB). Approximately 95% of the MB dye was broken down at pH 8 after 150 min of sunlight exposure. The aforementioned results, therefore, suggest that ZnONPs synthesized by implementing environmentally friendly techniques can be employed for a variety of environmental and biomedical applications.

The most common forms of vitamin D in human and mouse serum are vitamin D3 and vitamin D2 and their metabolites. The aim of this study is to determine whether diet and sunlight directly affect the circulating concentrations of vitamin D metabolites in a mouse model. We investigated the serum concentrations of eight vitamin D metabolites-vitamin D (vitamin D3 + vitamin D2), 25OHD (25OHD3 + 25OHD2), 1α25(OH)2D (1α25(OH)2D2, and 1α25(OH)2D3)-including their epimer, 3-epi-25OHD (3-epi-25OHD3 and 3-epi-25OHD2), and a bile acid precursor 7alpha-hydroxy-4-cholesten-3-one (7αC4), which is known to cause interference in liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis.

This study successfully synthesized zinc oxide nanorod needles (ZnO-NRNs) using an environmentally friendly method employing Cymbopogon Proximus extract. The resulting ZnO-NRNs exhibited exceptional physicochemical and structural properties, confirmed through various characterization techniques, including UV-Vis spectrophotometry, dynamic light scattering (DLS), transmission electron microscopy (TEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDX). The analysis revealed a hexagonal wurtzite structure with high crystallinity, a 3.6 eV band gap, and a notably blue-shifted absorption band. ZnO-NRNs showed impressive photocatalytic activity, degrading Rhodamine B dye by 97% under UV and visible sunlight, highlighting their photostability and reusability. This green synthesis process offers cost effectiveness and environmental sustainability for practical applications.

In this work, feasible mechanisms and pathways of the C₂H₅O₂ + BrO reaction in the atmosphere were investigated using quantum chemistry methods, i.e., QCISD(T)/6-311++G(2df,2p)//B3LYP/6-311++G(2df,2p) levels of theory. Our result indicates that the title reaction occurs on both the singlet and triplet potential energy surfaces (PESs). Kinetically, singlet C₂H₅O₃Br and C₂H₅O₂BrO were dominant products under the atmospheric conditions below 300 K. CH₃CHO₂ + HOBr, CH₃CHO + HOBrO, and CH₃CHO + HBrO₂ are feasible to a certain extent thermodynamically. Because of high energy barriers, all products formed on the triplet PES are negligible. Moreover, time-dependent density functional theory (TDDFT) calculation implies that C₂H₅O₃Br and C₂H₅O₂BrO will photolyze under the sunlight.

In this work, a two-phase system composed of hydrophobic ionic liquid (IL) and water phases was introduced to prepare copper sulfide (CuS) nanoparticles. It was found that CuS particles generated from the interfaces of carboxyl-functionalized IL and sodium sulfide (Na2S) aqueous solution were prone to aggregate into nanoplates and those produced from the interfaces of carboxyl-functionalized IL and thioacetamide (TAA) aqueous solution tended to aggregate into nanospheres. Both the CuS nanoplates and nanospheres exhibited a good absorption ability for ultraviolet and visible light. Furthermore, the CuS nanoplates and nanospheres showed highly efficient photocatalytic activity in degrading rhodamine B (RhB). Compared with the reported CuS nanostructures, the CuS nanoparticles prepared in this work could degrade RhB under natural sunlight irradiation. Finally, the production of CuS from the interfaces of hydrophobic IL and water phases had the advantages of mild reaction conditions and ease of operation.

Interest in cultivating cannabis for medical and recreational purposes is increasing due to a dramatic shift in cannabis legislation worldwide. Therefore, a comprehensive understanding of the composition of secondary metabolites, cannabinoids, and terpenes grown in different environmental conditions is of primary importance for the medical and recreational use of cannabis. We compared the terpene and cannabinoid profiles using gas/liquid chromatography and mass spectrometry for commercial cannabis from genetically identical plants grown indoors using artificial light and artificially grown media or outdoors grown in living soil and natural sunlight. By analyzing the cannabinoids, we found significant variations in the metabolomic profile of cannabis for the different environments. Overall, for both cultivars, there were significantly greater oxidized and degraded cannabinoids in the indoor-grown samples. Moreover, the outdoor-grown samples had significantly more unusual cannabinoids, such as C4- and C6-THCA. There were also significant differences in the terpene profiles between indoor- and outdoor-grown cannabis. The outdoor samples had a greater preponderance of sesquiterpenes including β-caryophyllene, α-humulene, α-bergamotene, α-guaiene, and germacrene B relative to the indoor samples.

Peach leaf orange dark tea (ODT) is a fruity tea made by removing the pulp from peach leaf orange and placing dry Qingzhuan tea into the husk, followed by fixing them together and drying. Since the quality of traditional outdoor sunlight fixing (SL) is affected by weather instability, this study explored the feasibility of two new fixing methods, including hot air fixing (HA) and steam fixing (ST). Results showed that fixing method had a great impact on ODT shape, aroma, and taste. Compared with SL and ST, HA endowed ODT with higher fruit aroma, mellow taste, better coordination, and higher sensory evaluation score. Physical-chemical composition analysis showed that SL-fixed orange peel was higher than HA- or ST-fixed peel in the content of polyphenols, flavonoids, soluble protein, hesperidin and limonin, while HA has a higher content of volatile substances and contains more alcohols, aldehydes and ketones, and acid and esters than ST and SL. Activity analysis showed that HA was superior to ST or SL in comprehensive antioxidant activity and inhibitory activity against α-glucosidase. Comprehensive results demonstrated that HA has better performance in improving ODT quality and can replace the traditional SL method in production.

Lichens are considered a great bio-resource because they produce large numbers of secondary metabolites with many biological activities; however, they have not been cultivated under artificial conditions to date. As a result, lichen substances from natural sources are limited and have not been widely utilized in commercial applications. Accordingly, interest in lichen-associated fungi, especially endogenic fungi, has increased. Ultraviolet (UV) radiation in sunlight is harmful to human health, resulting in demand for effective UV filtering agents for use in sunscreen. In this study, we purified (3R)-5-hydroxymellein, which has UVA absorption activity, from the secondary metabolites of an endolichenic fungus (ELF000039). The antioxidant properties were then assessed by in vitro tests. The antioxidant activity of (3R)-5-hydroxymellein was high when compared to the recognized antioxidants ascorbic acid (ASA) and butyl hydroxyl anisole (BHA). Moreover, the compound exhibited no cytotoxicity toward mouse melanoma cell lines, B16F1 and B16F10, or the normal cell line, HaCaT. Furthermore, (3R)-5-hydroxymellein recovered the damage caused by UVB irradiation and inhibited melanin synthesis. Taken together, these results suggest that (3R)-5-hydroxymellein could have an interesting and vital profile to go further development as a multifunctional skin UV protectant.

Metronidazole is a drug widely used in the prevention and treatment of bacterial infections. Due to its possibility of the formation of stable metal complexes, it was decided to broaden its activity spectrum by introducing the silver(I) coordination compounds i.e., [Ag(MTZ)2NO3] and [(Ag(MTZ)2)2]SO4, which have significant antibacterial properties. The paper presents a description of a new qualitative and quantitative analysis of metronidazole in bulk and possible pharmaceutical preparations by thin-layer chromatography with densitometric detection. Optimal separation conditions were selected, and the analytical procedure was validated according to the ICH guidelines. The obtained data indicate that the method is sufficiently sensitive, precise, and accurate. The stability of the metronidazole solutions obtained from tablets, pure metronidazole, and its silver(I) complexes was tested. The research was carried out in various environments, at different temperatures, in H2O2 solution, and during exposure to radiation (UV, sunlight). The greatest degradation was found in the alkaline environment and at higher temperatures. The silver(I) complexes exhibited relatively high stability under analyzed conditions that are higher than standard metronidazole solutions and tablets. The observations were confirmed by the kinetic and thermodynamic analysis. The described studies of new metronidazole silver(I) complexes increase the potential for their application in infections both in humans and animals.

The young leaves of green tea become lighter in color than usual when protected from sunlight by a shading net for about two weeks while growing. These leaves are called "shaded white leaf tea" or SWLT. In the eluate of SWLT, the amount of amino acids (361 mg/L) was significantly higher than that in regular tea (53.5 mg/L). Since theanine and arginine, the first and second most abundant amino acids in SWLT, have significant antistress effects, we examined the antistress effect of SWLT on humans. SWLT or placebo green tea (3 g) was eluted with room-temperature water (500 mL). Participants consumed the tea for one week prior to pharmacy practice and continued for 10 days in the practice period. The state-trait anxiety inventory, an anxiety questionnaire, tended to be scored lower in the SWLT group than the placebo, but other stress markers showed no differences. The effect of the difference in SWLT components examined with mice showed that aspartic acid and asparagine, which are abundant in SWLT, counteracted the antistress effects of theanine and arginine. Large amounts of caffeine also interfered with SWLT's antistress effect. Thus, SWLT, which is high in caffeine and amino acids, suppressed depressant behavior in mice.

Microalgae are freshwater and marine unicellular photosynthetic organisms that utilize sunlight to produce biomass. Due to fast microalgal growth rate and their unique biochemical profiles and potential applications in food and renewable energy industries, the interest in microalgal research is rapidly increasing. Biochemical and genetic engineering have been considered to improve microalgal biomass production but these manipulations also limited microalgal growth. The aim of the study was the biochemical characterization of recently identified microalgal strain Planktochlorella nurekis with elevated cell size and DNA levels compared to wild type strain that was achieved by a safe non-vector approach, namely co-treatment with colchicine and cytochalasin B (CC). A slight increase in growth rate was observed in twelve clones of CC-treated cells. For biochemical profiling, several parameters were considered, namely the content of proteins, amino acids, lipids, fatty acids, β-glucans, chlorophylls, carotenoids, B vitamins and ash. CC-treated cells were characterized by elevated levels of lipids compared to unmodified cells. Moreover, the ratio of carotenoids to chlorophyll a and total antioxidant capacity were slightly increased in CC-treated cells. We suggest that Planktochlorella nurekis with modified DNA levels and improved lipid content can be considered to be used as a dietary supplement and biofuel feedstock.