The signal-to-noise ratio (SNR) is one of the key features of a fluorescent probe and one that often defines its potential utility for in vivo labeling and analyte detection applications. Here, it is reported that introducing a pyridine group into traditional cyanine-7 dyes in an asymmetric manner provides a series of tunable NIR fluorescent dyes (Cy-Mu-7) characterized by enhanced Stokes shifts (≈230 nm) compared to the parent cyanine 7 dye (<25 nm). The observed Stokes shift increase is ascribed to symmetry breaking of the Cy-Mu-7 core and a reduction in the extent of conjugation. The fluorescence signals of the Cy-Mu-7 dyes are enhanced upon confinement within the hydrophobic cavity of albumin or via spontaneous encapsulation within micelles in aqueous media. Utilizing the Cy-Mu-7, ultra-fast in vivo kidney labeling in mice is realized, and it is found that the liver injury will aggravate the burden of kidney by monitoring the fluorescence intensity ratio of kidney to liver. In addition, Cy-Mu-7 could be used as efficient chemiluminescence resonance energy transfer acceptor for the reaction between H2 O2 and bisoxalate. The potential utility of Cy-Mu-7 is illustrated via direct monitoring fluctuations in endogenous H2 O2 levels in a mouse model to mimic emergency room trauma.

Luminescence imaging is widely used to identify spatial defects and extract key electrical parameters of photovoltaic devices. To reliably identify defects, high-quality images are desirable; however, acquiring such images implies a higher cost or lower throughput as they require better imaging systems or longer exposure times. This study proposes a deep learning-based method to effectively diminish the noise in luminescence images, thereby enhancing their quality for inspection and analysis. The proposed method eliminates the requirement for extra hardware expenses or longer exposure times, making it a cost-effective solution for image enhancement. This approach significantly improves image quality by >30% and >39% in terms of the peak signal-to-noise ratio and the structural similarity index, respectively, outperforming state-of-the-art classical denoising algorithms.

Developing activatable fluorescent probes with superlative fluorescence enhancement factor (F/F0 ) to improve the signal-to-noise (S/N) ratio is still an urgent issue. "AND" molecular logic gates are emerging as a useful tool for enhanced probes selectivity and accuracy. Here, an "AND" logic gate is developed as super-enhancers for designing activatable probes with huge F/F0 and S/N ratio. It utilizes lipid-droplets (LDs) as controllable background input and sets the target analyte as variable input. The fluorescence is tremendously quenching due to double locking, thus an extreme F/F0 ratio of target analyte is obtained. Importantly, this probe can transfer to LDs after a response occurs. The target analyte can be directly visualized through the spatial location without a control group. Accordingly, a peroxynitrite (ONOO- ) activatable probe (CNP2-B) is de novo designed. The F/F0 of CNP2-B achieves 2600 after reacting with ONOO- . Furthermore, CNP2-B can transfer from mitochondria to lipid droplets after being activated. The higher selectivity and S/N ratio of CNP2-B are obtained than commercial probe 3'-(p-hydroxyphenyl) fluorescein (HPFin vitro and in vivo. Therefore, the atherosclerotic plaques at mouse models are delineated clearly after administration with in situ CNP2-B probe gel. Such input controllable "AND" logic gate is envisioned to execute more imaging tasks.

The introduction of controlled self-assembly into living organisms opens up desired biomedical applications in wide areas including bioimaging/assays, drug delivery, and tissue engineering. Besides the enzyme-activated examples reported before, controlled self-assembly under integrated stimuli, especially in the form of sequential input, is unprecedented and ultimately challenging. This study reports a programmable self-assembling strategy in living cells under sequentially integrated control of both endogenous and exogenous stimuli. Fluorescent polymerized vesicles are constructed by using cholinesterase conversion followed by photopolymerization and thermochromism. Furthermore, as a proof-of-principle application, the cell apoptosis involved in the overexpression of cholinesterase in virtue of the generated fluorescence is monitored, showing potential in screening apoptosis-inducing drugs. The approach exhibits multiple advantages for bioimaging in living cells, including specificity to cholinesterase, red emission, wash free, high signal-to-noise ratio.

Functional probes are a leading contender for the recognition and manipulation of nervous behavior and are characterized by substantial scientific and technological potential. Despite the recent development of functional neural probes, a flexible biocompatible probe unit that allows for long-term simultaneous stimulation and signaling is still an important task. Here, a category of flexible tiny multimaterial fiber probes (<0.3 g) is described in which the metal electrodes are regularly embedded inside a biocompatible polymer fiber with a double-clad optical waveguide by thermal drawing. Significantly, this arrangement enables great improvement in mechanical properties, achieves high optical transmission (>90%), and effectively minimizes the impedance (by up to one order of magnitude) of the probe. This ability allows to realize long-term (at least 10 weeks) simultaneous optical stimulation and neural recording at the single-cell level in behaving mice with signal-to-noise ratio (SNR = 30 dB) that is more than 6 times that of the benchmark probe such as an all-polymer fiber.

Understanding brain functions at the circuit level requires time-resolved simultaneous measurement of a large number of densely distributed neurons, which remains a great challenge for current neural technologies. In particular, penetrating neural electrodes allow for recording from individual neurons at high temporal resolution, but often have larger dimensions than the biological matrix, which induces significant damage to brain tissues and therefore precludes the high implant density that is necessary for mapping large neuronal populations with full coverage. Here, it is demonstrated that nanofabricated ultraflexible electrode arrays with cross-sectional areas as small as sub-10 µm2 can overcome this physical limitation. In a mouse model, it is shown that these electrodes record action potentials with high signal-to-noise ratio; their dense arrays allow spatial oversampling; and their multiprobe implantation allows for interprobe spacing at 60 µm without eliciting chronic neuronal degeneration. These results present the possibility of minimizing tissue displacement by implanted ultraflexible electrodes for scalable, high-density electrophysiological recording that is capable of complete neuronal circuitry mapping over chronic time scales.

Chemiluminescence (CL) imaging, as an excitation-free technique, exhibits a markedly improved signal-to-noise ratio (SNR) owing to the absence of an excitation light source and autofluorescence interference. However, conventional chemiluminescence imaging generally focuses on the visible and first near-infrared (NIR-I) regions, which hinders high-performance biological imaging due to strong tissue scattering and absorption. To address the issue, self-luminescent NIR-II CL nanoprobes with a second near-infrared (NIR-II) luminescence in the presence of hydrogen peroxide are rationally designed. A cascade energy transfer, including chemiluminescence resonance energy transfer (CRET) from the chemiluminescent substrate to NIR-I organic molecules and Förster resonance energy transfer (FRET) from NIR-I organic molecules to NIR-II organic molecules, occurs in the nanoprobes, contributing to NIR-II light with great efficiency and good tissue penetration depth. Based on excellent selectivity, high sensitivity to hydrogen peroxide, and long-lasting luminescence performance, the NIR-II CL nanoprobes are applied to detect inflammation in mice, showing a 7.4-fold enhancement in SNR compared with that of fluorescence.

Subarachnoid hemorrhage (SAH) is a severe subtype of stroke caused by the rupturing of blood vessels in the brain. The ability to accurately assess the degree of bleeding in an SAH model is crucial for understanding the brain-damage mechanisms and developing therapeutic strategies. However, current methods are unable to monitor microbleeding owing to their limited sensitivities. Herein, a new bleeding assessment system using a bioprobe TTVP with aggregation-induced emission (AIE) characteristics is demonstrated. TTVP is a water-soluble, small-molecule probe that specifically interacts with blood. Taking advantage of its AIE characteristics, cell membranes affinity, and albumin-targeting ability, TTVP fluoresces in bleeding areas and detects the presence of blood with a high signal-to-noise (S/N) ratio. The degree of SAH bleeding in an endovascular perforation model is clearly evaluated based on the intensity of the fluorescence observed in the brain, which enables the ultrasensitive detection of mirco-bleeding in the SAH model in a manner that outperforms the current imaging strategies. This method serves as a promising tool for the sensitive analysis of the degree of bleeding in SAHs and other hemorrhagic diseases.

Augmented reality (AR) is a computer graphics technique that creates a seamless interface between the real and virtual worlds. AR usage rapidly spreads across diverse areas, such as healthcare, education, and entertainment. Despite its immense potential, AR interface controls rely on an external joystick, a smartphone, or a fixed camera system susceptible to lighting. Here, an AR-integrated soft wearable electronic system that detects the gestures of a subject for more intuitive, accurate, and direct control of external systems is introduced. Specifically, a soft, all-in-one wearable device includes a scalable electrode array and integrated wireless system to measure electromyograms for real-time continuous recognition of hand gestures. An advanced machine learning algorithm embedded in the system enables the classification of ten different classes with an accuracy of 96.08%. Compared to the conventional rigid wearables, the multi-channel soft wearable system offers an enhanced signal-to-noise ratio and consistency over multiple uses due to skin conformality. The demonstration of the AR-integrated soft wearable system for drone control captures the potential of the platform technology to offer numerous human-machine interface opportunities for users to interact remotely with external hardware and software.

Molecular oxygen (O2) plays a key role in many physiological processes, and becomes a toxicant to kill cells when excited to 1O2. Intracellular O2 levels, or the degree of hypoxia, are always viewed as an indicator of cancers. Due to the highly efficient cancer therapy ability and low side effect, photodynamic therapy (PDT) becomes one of the most promising treatments for cancers. Herein, an early-stage diagnosis and therapy system is reported based on the phosphorescent conjugated polymer dots (Pdots) containing Pt(II) porphyrin as an oxygen-responsive phosphorescent group and 1O2 photosensitizer. Intracellular hypoxia detection has been investigated. Results show that cells treated with Pdots display longer lifetimes under hypoxic conditions, and time-resolved luminescence images exhibit a higher signal-to-noise ratio after gating off the short-lived background fluorescence. Quantification of O2 is realized by the ratiometric emission intensity of phosphorescence/fluorescence and the lifetime of phosphorescence. Additionally, the PDT efficiency of Pdots is estimated by flow cytometry, MTT cell viability assay, and in situ imaging of PDT induced cell death. Interestingly, Pdots exhibit a high PDT efficiency and would be promising in clinical applications.

Active electrocorticogram (ECoG) electrodes can amplify weak electrophysiological signals and improve anti-interference ability; however, traditional active electrodes are opaque and cannot realize photoelectric collaborative observation. In this study, an active and fully transparent ECoG array based on zinc oxide thin-film transistors (ZnO TFTs) is developed as a local neural signal amplifier for electrophysiological monitoring. The transparency of the proposed ECoG array is up to 85%, which is superior to that of the previously reported active electrode arrays. Various electrical characterizations have demonstrated its ability to record electrophysiological signals with a higher signal-to-noise ratio of 19.9 dB compared to the Au grid (13.2 dB). The high transparency of the ZnO-TFT electrode array allows the concurrent collection of high-quality electrophysiological signals (32.2 dB) under direct optical stimulation of the optogenetic mice brain. The ECoG array can also work under 7-Tesla magnetic resonance imaging to record local brain signals without affecting brain tissue imaging. As the most transparent active ECoG array to date, it provides a powerful multimodal tool for brain observation, including recording brain activity under synchronized optical modulation and 7-Tesla magnetic resonance imaging.

Advanced optical imaging techniques address important biological questions in neuroscience, where structures such as synapses are below the resolution limit of a conventional microscope. At the same time, microelectrode arrays (MEAs) are indispensable in understanding the language of neurons. Here, the authors show transparent MEAs capable of recording action potentials from neurons and compatible with advanced microscopy. The electrodes are made of the conducting polymer poly(3,4-ethylenedioxythiophene) doped with polystyrene sulfonate (PEDOT:PSS) and are patterned by optical lithography, ensuring scalable fabrication with good control over device parameters. A thickness of 380 nm ensures low enough impedance and >75% transparency throughout the visible part of the spectrum making them suitable for artefact-free recording in the presence of laser illumination. Using primary neuronal cells, the arrays record single units from multiple nearby sources with a signal-to-noise ratio of 7.7 (17.7 dB). Additionally, it is possible to perform calcium (Ca2+) imaging, a measure of neuronal activity, using the novel transparent electrodes. Different biomarkers are imaged through the electrodes using conventional and super-resolution microscopy (SRM), showing no qualitative differences compared to glass substrates. These transparent MEAs pave the way for harnessing the synergy between the superior temporal resolution of electrophysiology and the selectivity and high spatial resolution of optical imaging.

Monitoring insects of different species to understand the factors affecting their diversity and decline is a major challenge. Laser remote sensing and spectroscopy offer promising novel solutions to this. Coherent scattering from thin wing membranes also known as wing interference patterns (WIPs) have recently been demonstrated to be species specific. The colors of WIPs arise due to unique fringy spectra, which can be retrieved over long distances. To demonstrate this, a new concept of infrared (950-1650 nm) hyperspectral lidar with 64 spectral bands based on a supercontinuum light source using ray-tracing and 3D printing is developed. A lidar with an unprecedented number of spectral channels, high signal-to-noise ratio, and spatio-temporal resolution enabling detection of free-flying insects and their wingbeats. As proof of principle, coherent scatter from a damselfly wing at 87 m distance without averaging (4 ms recording) is retrieved. The fringed signal properties are used to determine an effective wing membrane thickness of 1412 nm with ±4 nm precision matching laboratory recordings of the same wing. Similar signals from free flying insects (2 ms recording) are later recorded. The accuracy and the method's potential are discussed to discriminate species by capturing coherent features from free-flying insects.

In the fast-evolving landscape of decentralized and personalized healthcare, the need for multimodal biosensing systems that integrate seamlessly with the human body is growing rapidly. This presents a significant challenge in devising ultraflexible configurations that can accommodate multiple sensors and designing high-performance sensing components that remain stable over long periods. To overcome these challenges, ultraflexible organic photodetectors (OPDs) that exhibit exceptional performance under near-infrared illumination while maintaining long-term stability are developed. These ultraflexible OPDs demonstrate a photoresponsivity of 0.53 A W-1 under 940 nm, shot-noise-limited specific detectivity of 3.4 × 1013 Jones, and cut-off response frequency beyond 1 MHz at -3 dB. As a result, the flexible photoplethysmography sensor boasts a high signal-to-noise ratio and stable peak-to-peak amplitude under hypoxic and hypoperfusion conditions, outperforming commercial finger pulse oximeters. This ensures precise extraction of blood oxygen saturation in dynamic working conditions. Ultraflexible OPDs are further integrated with conductive polymer electrodes on an ultrathin hydrogel substrate, allowing for direct interface with soft and dynamic skin. This skin-integrated sensing platform provides accurate measurement of photoelectric and biopotential signals in a time-synchronized manner, reproducing the functionality of conventional technologies without their inherent limitations.

Fano resonance, known for its unique asymmetric line shape, has gained significant attention in photonics, particularly in sensing applications. However, it remains difficult to achieve controllable Fano parameters with a simple geometric structure. Here, a novel approach of using a thin-film optical Fano resonator with a porous layer to generate entire spectral shapes from quasi-Lorentzian to Lorentzian to Fano is proposed and experimentally demonstrated. The glancing angle deposition technique is utilized to create a polarization-dependent Fano resonator. By altering the linear polarization between s- and p-polarization, a switchable Fano device between quasi-Lorentz state and negative Fano state is demonstrated. This change in spectral shape is advantageous for detecting materials with a low-refractive index. A bio-particle sensing experiment is conducted that demonstrates an enhanced signal-to-noise ratio and prediction accuracy. Finally, the challenge of optimizing the film-based Fano resonator due to intricate interplay among numerous parameters, including layer thicknesses, porosity, and materials selection, is addressed. The inverse design tool is developed based on a multilayer perceptron model that allows fast computation for all ranges of Fano parameters. The method provides improved accuracy of the mean validation factor (MVF = 0.07, q-q') compared to the conventional exhaustive enumeration method (MVF = 0.37).

Neural interfaces for stable access to the spinal cord (SC) electrical activity can benefit patients with motor dysfunctions. Invasive high-density electrodes can directly extract signals from SC neuronal populations that can be used for the facilitation, adjustment, and reconstruction of motor actions. However, developing neural interfaces that can achieve high channel counts and long-term intraspinal recording remains technically challenging. Here, a biocompatible SC hyperflexible electrode array (SHEA) with an ultrathin structure that minimizes mechanical mismatch between the interface and SC tissue and enables stable single-unit recording for more than 2 months in mice is demonstrated. These results show that SHEA maintains stable impedance, signal-to-noise ratio, single-unit yield, and spike amplitude after implantation into mouse SC. Gait analysis and histology show that SHEA implantation induces negligible behavioral effects and Inflammation. Additionally, multi-unit signals recorded from the SC ventral horn can predict the mouse's movement trajectory with a high decoding coefficient of up to 0.95. Moreover, during step cycles, it is found that the neural trajectory of spikes and low-frequency local field potential (LFP) signal exhibits periodic geometry patterns. Thus, SHEA can offer an efficient and reliable SC neural interface for monitoring and potentially modulating SC neuronal activity associated with motor dysfunctions.

Bioelectric electrodes with low modulus and high adhesion have been intensively pursued, as they afford conformal and strong bonding at skin-electrode interface to improve the fidelity and stability of electrophysiological signals. However, during detachment, tough adhesion can cause pain or skin allergy; worse still, the soft electrodes can suffer damage due to excessive stretch/torsion, hampering long-term, dynamic, and multiple uses. Herein, a bioelectric electrode is proposed by transferring silver nanowires (AgNWs) network to the surface of bistable adhesive polymer (BAP). The phase transition temperature of BAP is tuned to be slightly below skin temperature at 30 °C. Triggered by skin heat, the BAP electrode achieves low modulus and high adhesion within seconds, allowing robust skin-electrode interface under dry, wet, and body-moving conditions. Ice bag treatment can dramatically stiffen the electrode and reduce the adhesion, which allows painless detachment and avoids electrode damage. Meanwhile, the AgNWs network with biaxial wrinkled microstructure remarkably promotes the electro-mechanical stability of the BAP electrode. The BAP electrode successfully combines long-term (7 days) and dynamic (body movements, sweat, underwater) stability, reusability (at least ten times), and minimized skin irritation during electrophysiological monitoring. The high signal-to-noise ratio and dynamic stability are demonstrated in the application of piano-playing training.