Regulatory efforts rely on nanometrology for the development and implementation of laws regarding the incorporation of engineered nanomaterials (ENMs) into industrial and consumer products. Copper is currently one of the most common metals used in the constantly developing and expanding sector of nanotechnology. The use of copper nanoparticles in products, such as agricultural biocides, cosmetics and paints, is increasing. Copper based ENMs will eventually be released to the environment through the use and disposal of nano-enabled products, however, the detection of copper ENMs in environmental samples is a challenging task. Single particle inductively coupled plasma mass spectroscopy (spICP-MS) has been suggested as a powerful tool for routine nanometrology efforts. In this work, we apply a spICP-MS method for the detection of engineered copper nanomaterials in colloidal extracts from natural soil samples. Overall, copper nanoparticles were successfully detected in the soil colloidal extracts and the importance of dwell time, background removal, and sample dilution for method optimization and recovery maximization is highlighted.

To investigate the treatment effect of algae biosorbent on heavy metal wastewater, in this paper, the adsorption effect of M. aeruginosa powder on heavy metal ions copper, cadmium and nickel was investigated using the uniform experimental method, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and TG-DSC comprehensive thermal analysis. The experimental results showed that the initial concentration of copper ion solution was 25 mg/L, the temperature was 30 °C, the pH value was 8 and the adsorption time was 5 h, which was the best condition for the removal of copper ions by algae powder adsorption, and the removal rate was 83.24%. The initial concentration of cadmium ion solution was 5 mg/L, the temperature was 35 °C, the pH value was 8 and the adsorption time was 4 h, which was the best condition for the adsorption of cadmium ion by algae powder, and the removal rate was 92.00%. The initial nickel ion solution concentration of 15 mg/L, temperature of 35 °C, pH value of 7 and adsorption time of 1 h were the best conditions for the adsorption of nickel ions by algae powder, and the removal rate was 88.67%. The spatial structure of algae powder changed obviously before and after adsorbing heavy metals. The functional groups such as amino and phosphate groups on the cell wall of M. aeruginosa enhanced the adsorption effect of heavy metal ions copper, cadmium and nickel. Additionally, M. aeruginosa adsorption of heavy metal ions copper, cadmium, nickel is an exothermic process. The above experiments show that M. aeruginosa can be used as a biological adsorbent to remove heavy metals, which lays a theoretical foundation for the subsequent treatment of heavy metal pollution by algae.

Trypsin is a serine protease, which has been proved to be a novel superoxide scavenger. The burst of superoxide induced by polychlorinated biphenyls can be impeded by trypsin in both wild type and sod knockout mutants of Escherichia coli. The experimental results demonstrated that the activities of superoxide scavenging of trypsin were significantly accelerated by Cu ions. Also, with the addition of Cu ions, a new β-sheet (β7) transited from a random coil in the Cu(II)-trypsin (TP) system, which was favorable for the formation of more contacts with other sheets of trypsin. Residue-residue network analysis and the porcupine plots proved that the Cu ion in trypsin strengthened some native interactions among residues, which ultimately resulted in much greater stability of the Cu(II)-TP system. Moreover, compact and stable trypsin structures with Cu ions might be responsible for significantly provoking the activity of superoxide scavenging.

Copper chrome arsenate (CCA) water-borne solution used to be widely used to make timber highly resistant to pests and fungi, in particular, wood products designed for outdoor use. Nowadays, CCA is a restricted chemical product in most countries, since potential environmental and health risks were reported due to dermal contact with CCA residues from treated structures and the surrounding soil, as well as the contamination of soils. However, large quantities of CCA-treated timber are still in use in framings, outdoor playground equipment, landscaping, building poles, jetty piles, and fencing structures around the world, thus CCA remains a source of pollutants to the environment and of increasing toxic metal/metalloid exposure (mainly in children). International efforts have been dedicated to the treatment of materials impregnated with CCA, however not only does some reuse of CCA-treated timber still occur, but also existing structures are leaking the toxic compounds into the environment, with impacts on the environment and animal and human health. This study highlights CCA mechanisms and the documented consequences in vivo of its exposure, as well as the adverse environmental and health impacts.

Rainwater is consumed for drinking water in many parts of Australia, either preferentially over municipal water or in regional or remote areas, because rainwater is the primary source of water. Previous rainwater studies in other areas in Australia have shown the levels of some metals to be above the Australian Drinking Water Guidelines (ADWG). This study assessed the level of metals in rainwater harvested in the Adelaide region. Water samples were collected from 53 tanks from three different sampling corridors. A total of 365 water samples were analysed for lead, zinc, copper, and cadmium using atomic absorption spectrophotometry. In 47 out of the 53 tanks, lead was above the ADWG of 0.01 ppm in at least one sample (with 180/365 samples above 0.01 ppm). Zinc was above the ADWG (3.0 ppm) in 53/365 samples, copper was above the ADWG (2.0 ppm) in eight samples out of 365 samples, and cadmium was above the ADWG (0.002 ppm) in 19 samples out of 365 samples. These data are consistent with other studies of rainwater quality in Australia. Comparisons of levels of metals and volume of rainfall in the sampling and preceding month, roof material, and tank material, the presence of a first-flush device, sampling corridor, and sample pH showed that the roof material was related to higher levels of metals. There was a significant relationship between sampling corridors and the levels of lead and zinc. Nine of the tanks surveyed had filters installed. There was a small, but statistically significant, decrease in the levels of metals that passed through a filter prior to collection but, in those samples, filters did not remove metals to below guideline concentrations. An estimate of exposure, and a brief discussion of health risks as a result of exposure to metals, is presented.

In recent decades, pollution levels have increased, mainly as a result of the intensive anthropogenic activities such industrial development, intensive agricultural practices, among others. The impact of metals and organic contaminants is, nowadays, a great concern to the scientific and political communities. Copper compounds are the main sold pesticides in Europe, as well as herbicides, including glyphosate. Diphenyl ethers are the second ones most sold. Glyphosate and copper compounds are intensively studied, but the opposite is seen in the case of diphenyl ethers, including fluorinated pesticides (e.g., oxyfluorfen). Some research has been performed to increase the knowledge about these contaminants, daily inputted on the aquatic systems and with dangerous effects at physical and biochemical levels on the organisms. A wide range of biomarkers (e.g., growth, survival, reproductive success, enzymatic activity, lipid metabolism) has been applied to determine the potential effects in many species. This review intends to: (a) perform a compilation of the knowledge in previous research about the action mode of organic (fluorinated-based herbicide) and inorganic (copper-based pesticides) contaminants; (b) carry out an information survey about the lethal and sub-lethal effects of the fluorinated-based pesticides, namely the oxyfluorfen and the copper-based pesticides, on aquatic species from different trophic levels, according to in vitro and in vivo studies; (c) understand the impact of oxyfluorfen and copper-based pesticides, considering their effects reported in in vitro studies and, simultaneously, the authorized concentrations by legal organizations and the effective concentrations of each pollutant found in the environment. The literature analyzed revealed noxious effects of Cu and oxyfluorfen to aquatic organisms, including freshwater and marine species, even when exposed to the reference as well as to environmental concentrations, thus highlighting the importance of more monitoring and ecotoxicological studies, to chemical pollutants and different species from different ecological niches, to sustain and improve the legislation.

We previously described the novel synthesis of a copper high-aspect ratio structure (CuHARS) biohybrid material using cystine. While extremely stable in water, CuHARS is completely (but slowly) degradable in cellular media. Here, integration of the CuHARS into cellulose matrices was carried out to provide added control for CuHARS degradation. Synthesized CuHARS was concentrated by centrifugation and then dried. The weighed mass was re-suspended in water. CuHARS was stable in water for months without degradation. In contrast, 25 μg/mL of the CuHARS in complete cell culture media was completely degraded (slowly) in 18 days under physiological conditions. Stable integration of CuHARS into cellulose matrices was achieved through assembly by mixing cellulose micro- and nano-fibers and CuHARS in an aqueous (pulp mixture) phase, followed by drying. Additional materials were integrated to make the hybrids magnetically susceptible. The cellulose-CuHARS composite films could be transferred, weighed, and cut into usable pieces; they maintained their form after rehydration in water for at least 7 days and were compatible with cell culture studies using brain tumor (glioma) cells. These studies demonstrate utility of a CuHARS-cellulose biohybrid for applied applications including: (1) a platform for biomedical tracking and (2) integration into a 2D/3D matrix using natural products (cellulose).

In order to address the large percentage of unexplained male infertility in humans, more detailed investigations using sperm functional tests are needed to identify possible causes for compromised fertility. Since many environmental and lifestyle factors might be contributing to infertility, future studies aiming to elucidate the effect of such factors on male fertility will need the use of appropriate research models. The current study aimed to assess the effects of two heavy metals, namely copper sulphate, and cadmium chloride, on non-human primate (NHP) sperm function in order to establish the possibility of using these primate species as models for reproductive studies. Our combined results indicated that the functionality of NHP spermatozoa is inhibited by the two heavy metals investigated. After in vitro exposure, detrimental effects, and significant lowered values (p < 0.05) were obtained for sperm motility, viability and vitality, acrosome intactness, and hyperactivation. These metals, at the tested higher concentrations, therefore, have the ability to impair sperm quality thereby affecting sperm fertilizing capability in both humans and NHPs.

Currently, medical and stored grain pests are major concerns of public health and economies worldwide. The synthetic pesticides cause several side effects to human and non-target organisms. Copper nanoparticles (CuNPs) were synthesized from an aqueous extract of Metarhizium robertsii and screened for insecticidal activity against Anopheles stephensi, Aedes aegypti, Culex quinquefasciatus, Tenebrio molitor and other non-target organisms such as Artemia salina, Artemia nauplii, Eudrilus eugeniae and Eudrilus andrei. The synthesized copper nano-particles were characterized using, UV-vis spectrophotometer, Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD), Energy Dispersive X-Ray analysis (EDaX), High Resolution Scanning Electron Microscope (HR-SEM) and Atomic Force Microscope (AFM) analysis. Insects were exposed to 25 μg/mL concentration produced significant mortality against larvae of A. stephensi, A. aegypti, C. quinquefasciatus and T. molitor. The lower toxicity was observed on non-target organisms. Results showed that, M. robertsii mediated synthesized CuNPs is highly toxic to targeted pests while they had lower toxicity were observed on non-target organisms.

Adsorption technologies are a focus of interest for the removal of pollutants in water treatment systems. These removal methods offer several design, operation and efficiency advantages over other wastewater remediation technologies. Particularly, graphene oxide (GO) has attracted great attention due to its high surface area and its effectiveness in removing heavy metals. In this work, we study the functionalization of GO with zinc oxide nanoparticles (ZnO) to improve the removal capacity of aluminum (Al) and copper (Cu) in acidic waters. Experiments were performed at different pH conditions (with and without pH adjustment). In both cases, decorated GO (GO/ZnO) nanocomposites showed an improvement in the removal capacity compared with non-functionalized GO, even when the pH of zero charge (pHPZC) was higher for GO/ZnO (5.57) than for GO (3.98). In adsorption experiments without pH adjustment, the maximum removal capacities for Al and Cu were 29.1 mg/g and 45.5 mg/g, respectively. The maximum removal percentages of the studied cations (Al and Cu) were higher than 88%. Further, under more acidic conditions (pH 4), the maximum sorption capacities using GO/ZnO as adsorbent were 19.9 mg/g and 33.5 mg/g for Al and Cu, respectively. Moreover, the removal percentages reach 95.6% for Al and 92.9% for Cu. This shows that decoration with ZnO nanoparticles is a good option for improving the sorption capacity of GO for Cu removal and to a lesser extent for Al, even when the pH was not favorable in terms of electrostatic affinity for cations. These findings contribute to a better understanding of the potential and effectiveness of GO functionalization with ZnO nanoparticles to treat acidic waters contaminated with heavy metals and its applicability for wastewater remediation.

Epidemiological evidence on the relationship between copper (Cu) and kidney function is rare, and few studies examine the sex differences in this association. We aimed to explore the overall and sex-based relationship between exposure to Cu and biomarkers of kidney function among 4331 participants of the 2011-2016 National Health and Nutrition Examination Survey. Multiple linear regression models were fitted to examine the overall and sex-specific associations between serum Cu and the kidney function indicator-estimated glomerular filtration rate (eGFR) and urinary albumin-creatinine ratio (UACR). Restricted cubic spline models (RCS) stratified by sex were performed to explore the sex-based dose-response associations. Serum Cu in the highest quartile was associated with higher levels of UACR (β = 0.203, 95% CI: 0.100 to 0.306) among overall participants. In males, there was an association of the highest Cu quartile with decreased eGFR (β = -0.023, 95% CI: -0.042 to -0.003) and increased UACR (β = 0.349, 95% CI: 0.171 to 0.527); serum Cu levels also demonstrated a negative nonlinear dose-response association with eGFR and a positive linear dose-response association with UACR in males, whereas females showed a marginally significant nonlinear positive association of eGFR with serum Cu levels. In conclusion, there were sex-specific and dose-response relationships between serum Cu and kidney function indicators. Further prospective and mechanistic studies are warranted.

The epidemiology of malaria, anaemia and malnutrition in children is potentially altered in mining development areas. In a copper extraction project in northwestern Zambia, a health impact assessment (HIA) was commissioned to predict, manage and monitor health impacts. Two cross-sectional surveys were conducted: at baseline prior to project development (2011) and at four years into development (2015). Prevalence of Plasmodium falciparum, anaemia and stunting were assessed in under-five-year-old children, while hookworm infection was assessed in children aged 9-14 years in communities impacted and comparison communities not impacted by the project. P. falciparum prevalence was significantly higher in 2015 compared to 2011 in both impacted and comparison communities (odds ratio (OR) = 2.51 and OR = 6.97, respectively). Stunting was significantly lower in 2015 in impacted communities only (OR = 0.63). Anaemia was slightly lower in 2015 compared to baseline in both impacted and comparison communities. Resettlement due to the project and migration background (i.e., moving into the area within the past five years) were generally associated with better health outcomes in 2015. We conclude that repeated cross-sectional surveys to monitor health in communities impacted by projects should become an integral part of HIA to deepen the understanding of changing patterns of health and support implementation of setting-specific public health measures.

A modeling method based on discrete wavelet transform (DWT) was introduced to analyze the concentration of chromium, copper, zinc, arsenic and lead in soil with a portable X-ray fluorescence (XRF) spectrometer. A total of 111 soil samples were collected and observed. Denoising and baseline correction were performed on each spectrum before modeling. The optimum conditions for pre-processing were denoising with Coiflet 3 on the 3rd level and baseline correction with Coiflet 3 on the 9th level. Calibration curves were established for the five heavy metals (HMs). The detection limits were compared before and after the application of DWT, the qualitative detection limits and the quantitative detection limits were calculated to be three and ten times as high as the standard deviation with silicon dioxide (blank), respectively. The results showed that the detection limits of the instrument using DWT were lower, and that they were below national soil standards; the determination coefficients (R²) based on DWT-processed spectra were higher, and ranged from 0.990 to 0.996, indicating a high degree of linearity between the contents of the HMs in soil and the XRF spectral characteristic peak intensity with the instrument measurement.

Phytotoxicity thresholds for heavy metals are derived from dose⁻response curves, which show the relationships between exposure dose and toxicity response. However, the results of tests or observations are commonly based on total heavy metal concentration, not the exposure dose that causes phytotoxicity; additionally, the phytotoxicity response differs with plant species. In the present study, the ethylenediaminetetraacetic acid (EDTA)-extractable copper (Cu) concentration was determined in order to evaluate Cu extractability. As two important horticultural food crops in Asia, tomato (Lycopersicon esculentum 'Meifen No. 1') and bok choy (Brassica rapa var. chinensis 'Susheng 28') were used to investigate Cu phytotoxicity in a wide range of Chinese soils with and without leaching treatment, after which relationships between Cu phytotoxicity thresholds based on EDTA-extractions and soil properties were established. The phytotoxicity thresholds showed that biomass of bok choy was more sensitive to Cu than tomato. Multiple linear regression analyses showed that soil factors, including organic carbon (OC), citrate dithionate extractable manganese (CD-Mn), cation exchange capacity (CEC), and CaCO₃ explained over 85% of the variance in Cu phytotoxicity thresholds. The EDTA-extractable Cu dose⁻response relationships were further improved by incorporating soil properties. The new phytotoxicity predictive models indicated soil properties (soil pH, OC, CEC, and oxalate-extractable Mn) and EDTA-extractable Cu concentration explained more than 90% of the variance in the phytotoxicity response of tomato and bok choy biomass. The new phytotoxicity predictive models could be used to develop a reasonable remediation strategy for contaminated soils.

Background: Hospital equipment made from copper alloys can play an important role in complementing traditional methods of disinfection. Aims of the study: The aim of this study was to assess the dynamics of the antimicrobial properties of selected copper alloys in different simulations of environmental conditions (with organic contamination vs. without organic contamination), and to test alternatives to the currently used testing methods. Materials and Methods: A modification of Japanese standard JIS Z 2801 as well as Staphylococcus aureus (SA) and Escherichia coli (EC) suspended in NaCl vs. tryptic soy broth (TSB) were used in tests performed on seven commonly used copper alloys, copper, and stainless steel. Results: A much faster reduction of the bacterial suspension was observed for the inoculum prepared in NaCl than in TSB. A faster reduction for EC than for SA was observed in the inoculum prepared in NaCl. The opposite results were found for the inoculum based on TSB. A significant correlation between the copper concentration in the copper alloys and the time and degree of bacterial suspension reduction was only observed in the case of EC. Conclusions: This study confirmed the antimicrobial properties of copper alloys, and additionally showed that Staphylococcus aureus was more resistant than Escherichia coli in the variant of the experiment without organic contamination. However, even for SA, a total reduction of the bacterial inoculum's density took no longer than 2 h. Under conditions simulating organic contamination, all of the tested alloys were shown to have bactericidal or bacteriostatic properties, which was contrary to the results from stainless steel.

Understanding spatial variation of potentially toxic trace elements (PTEs) in soil is necessary to identify the proper measures for preventing soil contamination at both operating and abandoned mining areas. Many studies have been conducted worldwide to explore the spatial variation of PTEs and to create soil contamination maps using geostatistical methods. However, they generally depend only on inductively coupled plasma atomic emission spectrometry (ICP-AES) analysis data, therefore such studies are limited by insufficient input data owing to the disadvantages of ICP-AES analysis such as its costly operation and lengthy period required for analysis. To overcome this limitation, this study used both ICP-AES and portable X-ray fluorescence (PXRF) analysis data, with relatively low accuracy, for mapping copper and lead concentrations at a section of the Busan abandoned mine in Korea and compared the prediction performances of four different approaches: the application of ordinary kriging to ICP-AES analysis data, PXRF analysis data, both ICP-AES and transformed PXRF analysis data by considering the correlation between the ICP-AES and PXRF analysis data, and co-kriging to both the ICP-AES (primary variable) and PXRF analysis data (secondary variable). Their results were compared using an independent validation data set. The results obtained in this case study showed that the application of ordinary kriging to both ICP-AES and transformed PXRF analysis data is the most accurate approach when considers the spatial distribution of copper and lead contaminants in the soil and the estimation errors at 11 sampling points for validation. Therefore, when generating soil contamination maps for an abandoned mine, it is beneficial to use the proposed approach that incorporates the advantageous aspects of both ICP-AES and PXRF analysis data.

In the Gulf of California; mineral deposits have contributed to high metal contents in coastal environments. This study examined cadmium; lead; copper; zinc; and iron contents in three fish species; Kyphosus vaigiensis (herbivore), Stegastes rectifraenum (omnivore), and Balistes polylepis (carnivore) at two mining sites. Metal concentrations were analyzed by atomic absorption spectrophotometry and stable nitrogen and carbon isotopes were estimated using mass spectrophotometry. Also, we assessed the risk to human health from the consumption of these three species based on permissible limits; although only two of them (Kyphosus and Balistes) are consumed as food. Metal concentrations differed among fish species; except for iron. The highest concentrations of metals were not always recorded in the species at the highest trophic level; i.e., Balistes. The highest concentrations (dry weight) recorded were cadmium (0.21 ± 0.03 µg g-1) and lead (1.67 ± 0.26 µg g-1), in S. rectifraenum; copper (1.60 ± 0.49 µg g-1) and zinc (67.30 ± 8.79 µg g-1), in B. polylepis; and iron (27.06 ± 2.58 µg g-1), in K. vaigiensis. Our findings show that each element accumulates differently in particular marine organisms; depending on the physiology of the species and the biogeochemistry of its habitat; which in turn is affected by the anthropogenic activities in adjacent areas. No risk of heavy metals toxicity is expected from the human consumption of the species and sites studied.

Toxic elements emitted from the Pechenganickel complex on the Kola Peninsula have caused concern about potential effects on local wild food in the border regions between Norway, Finland and Russia. The aim of this study was to assess Ni, Cu, Co, As, Pb, Cd, and Hg concentrations in local wild foods from these border regions. During 2013-2014, we collected samples of different berry, mushroom, fish, and game species from sites at varying distances from the Ni-Cu smelter in all three border regions. Our results indicate that the Ni-Cu smelter is the main source of Ni, Co, and As in local wild foods, whereas the sources of Pb and Cd are more complex. We observed no consistent trends for Cu, one of the main toxic elements emitted by the Ni-Cu smelter; nor did we find any trend for Hg in wild food. Concentrations of all investigated toxic elements were highest in mushrooms, except for Hg, which was highest in fish. EU maximum levels of Pb, Cd, and Hg were exceeded in some samples, but most had levels considered safe for human consumption. No international thresholds exist for the other elements under study.

The objectives of the present study were to determine the concentrations of heavy metals and metalloids in water, sediment and Osteochilus vittatus fish, and to assess chromosome aberrations, serum biochemical changes and histopathological alterations in O. vittatus from the Nam Kok river near the Sepon gold-copper mine, Lao People's Democratic Republic compared with the reference area. The results showed that Fe, Mn and Ni in water, As and Cd in sediment as well as As, Cd, Cr, Mn and Ni in O. vittatus muscle samples near the gold-copper mine exceeded standard values. Furthermore, the chromosome assessment in O. vittatus revealed seven types of chromosome aberrations, and the highest total number of chromosome aberrations was a centromere gap. The total number of chromosome aberrations, cell number with chromosome aberrations and percentage of chromosome aberrations in O. vittatus as well as serum liver enzymes between the studied areas were significantly different (p < 0.05). The liver histopathological alterations of the fish near the gold-copper mine revealed atypical cellular structures as nuclear membrane degeneration, rough endoplasmic reticulum disintegration and abnormal cytoplasmic mitochondria. The results of this study suggested that heavy metal and metalloid contaminations from the Sepon gold-copper mine area negatively affect O. vittatus fish in terms of chromosomal defects, serum biochemical changes and liver histopathological appearances.

Magnesium(II), calcium(II), chromium(III), zinc(II), copper(II), and selenium(IV) sitagliptin (STG) complexes-with the general formulas [Mg(STG)2(Cl)2]·6H2O, [Ca(STG)2(Cl)2], [Cr(STG)2(Cl)2]Cl.6H2O, [Zn(STG)2(Cl)2], [Cu(STG)2(Cl)2]·2H2O, and [Se(STG)2(Cl)2]Cl2, respectively-were designed and synthesized by the chemical reactions between metal(II, III, and IV) chloride salts with an STG ligand in situ methanol solvent in a 1:2 stoichiometric ratio (metal:ligand). Tentative structures of the complexes were proposed based on elemental analysis, molar conductance, magnetic moments, thermogravimetric analysis, and spectral (infrared, electronic, and 1H NMR) data. The particle size and morphological investigation were checked on the bases of scanning electron microscopy, transmission electron microscopy, and X-ray powder diffraction analyses. All the Mg2+, Ca2+, Cr3+, Zn2+, Cu2+, and Se4+ complexes were found to be six-coordinated, wherein the STG ligands act as bidentate chelating agents. This study demonstrates that pancreatic tissues are affected by the induction of experimental diabetes mellitus and clarifies the potential of the synthesized STG complexes, which was found to more significantly improve insulin secretion and the pancreatic and glycometabolic complications of diabetic rats than STG alone.