Curator Dashboard

Assay ready workstation that was developed in collaboration with MACHEREY-NAGEL for their vacuum based chemistry to quickly isolate high quality nucleic acids.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Assay ready workstation that automates ELISA processing of up to eight 96 well microplates in parallel.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Laboratory pH sensor that is commonly used for microtiter plate applications (especially solutions containing protein) with a slim tip that allows for immersion depth of only 7 mm.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

BiOS is automated bio freezer storage system specifically designed to store sensitive biological samples. This ultra low temperature freezer is capable of reaching temperatures as low as minus 80°C, ensuring biological specimen integrity. BiOS can be scaled to fit your laboratory needs as a premier option for storing biological samples.Automated sample storage platforms run on INSTINCT S software.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Assay ready workstation that fully automates image based blood fraction detection and aliquoting steps.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Luminometer combines instrumentation and software for uses includinh bioluminescent assays, protocols and support. You can measure flash or glow-type luminescence, have two fluorescent modules available, and it accommodates 1.5ml microcentrifuge tubes and 35mm petri dishes, with optional 12mm × 50mm test tube adapter. Measure light output from liquid and solid samples; no minimum volume requirements. The GloMax 20/20 blends user-friendly operation and a small footprint.This Instrument Was Retired September 1, 2023. Accessories and service available until September 1, 2028.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

BiOS is automated bio freezer storage system specifically designed to store sensitive biological samples. This ultra low temperature freezer is capable of reaching temperatures as low as minus 80°C, ensuring biological specimen integrity. BiOS can be scaled to fit your laboratory needs as a premier option for storing biological samples.Automated sample storage platforms run on INSTINCT S software.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Assay ready workstation that fully automates source target sampling of blood and other homogeneous and heterogeneous biological samples for downstream applications.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Assay ready workstation that fully automates cell lysis and differential separation of DNA from biological evidentiary samples contained in specialized, barcoded spin-basket/filter type AutoLys Tubes.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Fully automates source-target sampling of blood and other homogeneous and heterogeneous biological samples for downstream applications. The walkaway process safely removes and replaces stoppers from a variety of commercial blood collection-type tubes, mixes the samples, and precisely aliquots daughter samples in under two minutes per tube. Up to 64 source tubes and 256 target tubes may be processed at once.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Positive pressure module that automates positive pressure processes, such as solid-phase extraction (SPE) and other positive-pressure applications with high reproducibility.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Geno/Grinder is an automated high-throughput plant & animal tissue homogenizer and cell lyser. It is equipped with an adjustable clamp that accommodates a full range of sample vials from 2mL to 50mL centrifuge tubes or up to six deep-well titer plates. It is specifically designed for rapid cell disruption, cell lysis and tissue homogenization through bead beating. This enables fast and efficient extraction of nucleic acids, proteins and other molecules. The new model Geno/Grinder incorporates a password protected, touch screen control panel, enabling the user to program run time, rate, cycles and pause time. A full range of Kryotech accessories are available to preserve temperature sensitive samples such as proteins and RNA. The Geno/Grinder is also recognized as an excellent automatic axial extractor. It is the best tool for the QuEChERS method used for extracting pesticide residues and other organic compounds. The Geno/Grinder enables increased throughput, improved extraction efficiency and reproducibility over traditional sample preparation methods. A full range of pre-loaded sample vials for different sample types is also available for fast and set up.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Assay ready workstation that combines qPCR setup and qPCR on one platform.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Microplate luminometer that features two optional injectors and reads both glow- and flash-luminescent reactions in 96-well plates. The sensitivity and range enable a wide range of luminescent assays, including Promega bioluminescent reporter, cell-based and biochemical assays.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

HPLC liquid handler with midsize bed capacity and fraction collector. It has maximum flow rates up to 200 mL per min, injection loop volumes of 2 uL to 25 mL, and max sample mass of 15 grams per injection.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Disruptor is available in analog or digital models, allows for Hands-Free disruption of up to twelve 1.5 or 2.0ml microtubes with timer from 0-15 minutes or continuous for analog models, and from 0-99 minutes or continuous for Digital models. Provides multi-directional action, which simultaneously agitates and vortexes at high speed, dramatically increasing cell disruption or sample resuspension efficiency. Suitable for use in cold rooms or incubators. best for difficult glass bead procedures - cell disruption/homogenization of yeast, bacteria, plant and animal tissue or anything that requires extremely violent high speed agitation. Digital model incorporates an adjustable speed alarm. Remove microtube holder and attach the supplied Pop-off Cup for high speed vortexing of single test tubes. The patented Disruptor Genie provides multi-directional action, which simultaneously agitates and vortexes at high speed, dramatically increasing cell disruption or sample resuspension effeciency.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Magnetic resonance imager that is built around a third-generation, short-bore, superconducting 3.0T magnet and can generate multiple image contrasts in a single MRI scan including T1, T2, STIR, T1 FLAIR, T2 FLAIR* and PD contrasts of the brain in a single acquisition.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Reader with top-read capability measures fluorescence on variety of sample formats from 6- to 384-well microplates in endpoint, kinetic, spectral scan, and well-scan modes.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

QPixII offers high precision benchtop colony picking, gridding, and rearraying technology that has been specifically designed for high throughput genomics. It allows for automatic picking of 3500 colonies or plaques per hour. Constructed within a welded steel framework, the main bed is capable of holding 15 microtitre plates and 2 bioassay trays. The unit includes a sterilization bath and heated-air drier to ensure cleaning and drying of picking/gridding heads between the cycles. Colonies or plaques are visualized via CCD camera and picked from bioassay trays (QTrays) by a 96-pin picking head and inoculated into pre-filled 96 or 384 well QPlates. High accuracy picking, control and management at every step. Macroarrays are easily generated using the robots gridding software and accessories. Rearraying of clones can also be performed. The minimum computing requirements include WindowsTM software and an Intel Pentium III processor (600 MHz), 128 MB of RAM, and a 4 MB, 256 color video card. The unit is supplied with two picking/rearraying heads, one gridding head, and QSoft software including picking, gridding, and rearraying modules. Dimensions: 56.30"w x 28.74"d x 31.50"h.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Purification system intended for microgram-scale protein purifications in Tricorn columns up to milligram-scale using HiTrap and HiScreen columns. For fast protein liquid chromatography of tens of grams of protein,can be used with flow rates up to 150 mL/min. This high flow rate is necessary when working with high-flow resins in large columns. Columns can even be packed at flow rates as high as 300 mL/min. System reduces hands-on time so that you can spend less time purifying proteins and more time focusing on your results. Easily switch between different users and applications. To get you up and running quickly, methods are easily created by dragging and dropping predefined templates in UNICORN 7. Purification of protein to sufficiently high yield and purity can be a time- and resource-consuming process. To address fast and efficient protein purification, Can be set up in different ways to handle multistep purification. With an additional column valve up to 10 columns can be connected enabling automation of several samples and steps.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth