Curator Dashboard

High temperature septa that is made of preconditioned PTFE/silicone rubber and is 3.175 mm (0.125 in) thick. The average life of these septa is up to 100 injections with a 26s gauge needle. The maximum operating temperature is 212C.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Automated Screw Cap Tube Decapping

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Automated Screw Cap Tube Decapping

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Assay ready workstation that was developed in collaboration with MACHEREY-NAGEL for their vacuum based chemistry to quickly isolate high quality nucleic acids.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Assay ready workstation that automates ELISA processing of up to eight 96 well microplates in parallel.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Laboratory pH sensor that is commonly used for microtiter plate applications (especially solutions containing protein) with a slim tip that allows for immersion depth of only 7 mm.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

BiOS is automated bio freezer storage system specifically designed to store sensitive biological samples. This ultra low temperature freezer is capable of reaching temperatures as low as minus 80°C, ensuring biological specimen integrity. BiOS can be scaled to fit your laboratory needs as a premier option for storing biological samples.Automated sample storage platforms run on INSTINCT S software.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Assay ready workstation that fully automates image based blood fraction detection and aliquoting steps.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Luminometer combines instrumentation and software for uses includinh bioluminescent assays, protocols and support. You can measure flash or glow-type luminescence, have two fluorescent modules available, and it accommodates 1.5ml microcentrifuge tubes and 35mm petri dishes, with optional 12mm × 50mm test tube adapter. Measure light output from liquid and solid samples; no minimum volume requirements. The GloMax 20/20 blends user-friendly operation and a small footprint.This Instrument Was Retired September 1, 2023. Accessories and service available until September 1, 2028.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

BiOS is automated bio freezer storage system specifically designed to store sensitive biological samples. This ultra low temperature freezer is capable of reaching temperatures as low as minus 80°C, ensuring biological specimen integrity. BiOS can be scaled to fit your laboratory needs as a premier option for storing biological samples.Automated sample storage platforms run on INSTINCT S software.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Assay ready workstation that fully automates source target sampling of blood and other homogeneous and heterogeneous biological samples for downstream applications.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Assay ready workstation that fully automates cell lysis and differential separation of DNA from biological evidentiary samples contained in specialized, barcoded spin-basket/filter type AutoLys Tubes.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Fully automates source-target sampling of blood and other homogeneous and heterogeneous biological samples for downstream applications. The walkaway process safely removes and replaces stoppers from a variety of commercial blood collection-type tubes, mixes the samples, and precisely aliquots daughter samples in under two minutes per tube. Up to 64 source tubes and 256 target tubes may be processed at once.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Positive pressure module that automates positive pressure processes, such as solid-phase extraction (SPE) and other positive-pressure applications with high reproducibility.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Geno/Grinder is an automated high-throughput plant & animal tissue homogenizer and cell lyser. It is equipped with an adjustable clamp that accommodates a full range of sample vials from 2mL to 50mL centrifuge tubes or up to six deep-well titer plates. It is specifically designed for rapid cell disruption, cell lysis and tissue homogenization through bead beating. This enables fast and efficient extraction of nucleic acids, proteins and other molecules. The new model Geno/Grinder incorporates a password protected, touch screen control panel, enabling the user to program run time, rate, cycles and pause time. A full range of Kryotech accessories are available to preserve temperature sensitive samples such as proteins and RNA. The Geno/Grinder is also recognized as an excellent automatic axial extractor. It is the best tool for the QuEChERS method used for extracting pesticide residues and other organic compounds. The Geno/Grinder enables increased throughput, improved extraction efficiency and reproducibility over traditional sample preparation methods. A full range of pre-loaded sample vials for different sample types is also available for fast and set up.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Assay ready workstation that combines qPCR setup and qPCR on one platform.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Microplate luminometer that features two optional injectors and reads both glow- and flash-luminescent reactions in 96-well plates. The sensitivity and range enable a wide range of luminescent assays, including Promega bioluminescent reporter, cell-based and biochemical assays.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

HPLC liquid handler with midsize bed capacity and fraction collector. It has maximum flow rates up to 200 mL per min, injection loop volumes of 2 uL to 25 mL, and max sample mass of 15 grams per injection.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Disruptor is available in analog or digital models, allows for Hands-Free disruption of up to twelve 1.5 or 2.0ml microtubes with timer from 0-15 minutes or continuous for analog models, and from 0-99 minutes or continuous for Digital models. Provides multi-directional action, which simultaneously agitates and vortexes at high speed, dramatically increasing cell disruption or sample resuspension efficiency. Suitable for use in cold rooms or incubators. best for difficult glass bead procedures - cell disruption/homogenization of yeast, bacteria, plant and animal tissue or anything that requires extremely violent high speed agitation. Digital model incorporates an adjustable speed alarm. Remove microtube holder and attach the supplied Pop-off Cup for high speed vortexing of single test tubes. The patented Disruptor Genie provides multi-directional action, which simultaneously agitates and vortexes at high speed, dramatically increasing cell disruption or sample resuspension effeciency.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Magnetic resonance imager that is built around a third-generation, short-bore, superconducting 3.0T magnet and can generate multiple image contrasts in a single MRI scan including T1, T2, STIR, T1 FLAIR, T2 FLAIR* and PD contrasts of the brain in a single acquisition.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth