We support boolean queries, use +,-,<,>,~,* to alter the weighting of terms
Dynamic image analysis system that provides particle size and shape distribution analysis needed for quality control of fine powders and suspensions, measuring 0.8 um to 8 mm.
CC 55 Imaging Multichannel Spectrometer Simultaneous acquisition 10 26 Fiber Inputs with diameters in range of 100 400 mic Interline CCD, may allow shutter free set up Call us Line imaging on tall Sony ICX285AL CCD.
Benchtop model developed to provide simplicity with on site usability, from operation and maintenance to troubleshooting in water quality analysis.
CiCi Raman 785 is high performance spectrometer featuring aberration corrected concave holographic grating configured with Horiba Scientific's Syncerity TE cooled CCD camera with VIS NIR 2048 x 70 detector, in TE cooled Head at 50 degrees C.
Chemical concentration monitors that measure real time concentrations of various types of chemical solutions and control timing of automatic chemical spiking. Air is used for reference spectral measurements to be taken without abnormalities in solution flow.
Large cryogenic mill for cryogenic grinding and pulverizing tough and or temperature sensitive samples immersed in liquid nitrogen. It can be used for sample sizes ranging from 0.1 to 50 grams.
Continuous Emission Monitoring System CEMS is integrated system to measure fuel flow, dust, and concentrations of air pollutants such as SO2, NOx, CO, CO2, THC and O2 in accordance with applicable regulations for emission source.
Digital image processing particle size and shape analysis system that provides rapid and precise particle size and particle shape distributions for dry powders and bulk material in size range from 20 um to 30 millimeters. This technique provides wide variety of information about sample, from general size measurement, to shape parameters that can be closely correlated to specific performance characteristics. This also allows correlation to existing data from techniques as diverse as sieving, microscopy, and hand caliper measurement.
Water treatment plant analyzer that simultaneously measure both absorbance spectra and fluorescence Excitation Emission Matrices.
CM 200A 210A hydrofluoric acid monitors have been developed specifically to meet stringent demands of semiconductor manufacturing. CM 200A 210A provides real time read out of hydrofluoric acid concentration by measuring electric conductivity of sample solution. These superior units offer high repeatability even at low concentrations. CM 200A 210A can be used for variety of purposes ranging from monitoring etched wafer cleaning processes to any other industrial application of hydrofluoric acid.
Thin film measurement tool that allows full automatic analysis of thin film samples with push button operation. It includes automatic XYZ stage, real time imaging of measurement site and automatic selection of spot size.
Hitachi S-3000N scanning electron microscope (SEM) is a PC controlled variable pressure SEM with the ability to switch between the high vacuum and variable pressure modes. It has a high density frame memory of 1280x960 pixels and an advanced image capture and archiving system. Four quadrant solid state backscatter allows imaging in the compositional, 3D and topographic modes by manipulating from each segment of the detector.
Air quality monitoring system that measures metrological parameters such as wind speed, wind direction, rainfall, radiation, temperature, barometric pressure and ambient parameters. It also integrates series of ambient analyzers to monitor concentration of air pollutants continously.
Hitachi HD-2300 Dual EDS Cryo STEM (HD 2300) is a versatile Scanning Transmission Electron Microscope used for imaging and elemental analysis. The HD 2300 actually has three different electron detectors for different imaging modes (Transmitted Electron Detector, Annular Detector, and a Secondary Electron Detector) and features an electron Energy Loss Spectroscopy detector (EELS) and two EDS detectors (Energy Dispersive X-ray Spectroscopy) for elemental analysis and elemental mapping of a given sample. Overall, the HD 2300 is a multipurpose instrument for anyone who is looking to do research in material science, life science, chemistry and nanoscience.
Large focal length monochromators for spectroscopy applications such as Raman, Plasma Emission, and LIBS.
Highly sesitive ambient air pollutions monitors that give precise, realiable measurements, and are easy to maintain.
Air pollution multigas calibrator that is designed to calibrate gas analyzers manually, remotely controlled or automatically. It is installed in air pollution monitoring stations for quality assurance in laboratory and also in production of gas analyzers.
Defrost and detach tissue from specimen stage outside cryo chamber with Thermo Scientific HM 550 Cryostats Detach Block, featuring six positions marked with letters A to F.
HT7700 Transmission Electron Microscope with Dual-Mode objective lens features superior high-contrast and high-resolution performance together with analytical capabilities for biological and materials science. Digital design and sophisticated automation increase throughput for both novice and advanced users. Maximize contrast by lowering the high voltage through the 120-40 kV range and continue operation seamlessly. Configure the HT7700 to meet all of your advanced sample analysis needs, with customization options for BF-/DF-STEM, EDX, in-situ, cryo-microscopy, and electron tomography.
Explosion proof analyzers that provide safe, and accurate measurements when analyzing flammable gases or operating in explosive environments.