Curator Dashboard

E400 standard microscope is optimized for comfort in extended clinical applications.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Nikon A1R MP is a multiphoton imaging system featuring a high resolution galvanometer scanner and a high speed resonant scanner that is capable of frame rates from 30 fps at 512 x 512 pixels to as fast as 420 fps in band scan mode. New 4 channel non-descanned detectors with higher sensitivity, reduced dark current and broad spectral range allow for real time unmixing of closely spaced probes for accurate and high-contrast spectral imaging. This is especially important in multiphoton microscopy because of the overlap of emission spectra of probes and autofluorescence, which is often unavoidable when using a single laser line.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Basic confocal system consisting of a separate scan head, standard 5 PMT detectors, control module, and laser module. The A1 has a new multi-detector unit with 2 GaAsp PMT detectors to give brighter signals, enhanced signal-to-noise, and allow less phototoxicity.Fully automated A1 offers standard paired galvanometers with high resolution scanning at up to 4096 x 4096 pixels.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

A1R model incorporates a hybrid scanner system utilizing a high speed resonant galvanometer capable of acquisitions up to 240 frames per second. Both scanners can be used simultaneously for experiments requiring acquisition and photoactivation by concurrently scanning the specimen. This supports advanced research methods using photoactivation fluorescence proteins and facilitates high-speed, live-cell work with a huge array of new imaging strategies. A spectral imaging detector further enables the A1 and A1R models to obtain up to 32 discreet spectral bandwidths of data in one acquisition, with spectral unmixing capabilities. The total system is controlled through NIS-Elements C applications software, which also enables full control of the Nikon Ti-E research inverted microscope equipped with Nikon's Focus System (PFS), widefield CCD cameras and an array of hardware devices.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

New Brunswick C24KC Incubator Shaker microprocessor controls allow for uniform heating, motion and accurate regulation of shaking speed. Audible and visual alarms come standard with built-in timer. Speed ranges from 50 to 400 RPM and temperature ranges from 5 to 60 C.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Microvolume UV Vis spectrophotometer for nucleic acid and protein quantification that can measure multiple samples using 1 to 2 uL of samples. Can analyze spectrum of 220nm to 750nm and measure 96 samples in less than six minutes. Can measure multiple samples in one measurement cycle, up to eight samples at one time. Has single sample mode. Can analyze the full spectrum from 220 to 750nm and calculates sample purity ratios 260/280.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

SMZ1500 stereoscopic zoom microscope is system with apochromatic objectives, zoom ratio of 15 to 1, range of magnifications from 0.75x to 11.25x for total magnifying capability of 3.75x up to 540x, and is best for in depth imaging.Zoom knob allows to zoom from 1x to 11x at 1x-intervals without interrupting observations. Other facets include high eyepoint eyepieces with built-in diopter adjustments, wide field of view, and built-in aperture diaphragm for achieving optimal depth of focus and improved photomicrography.Provides options of either low eye-level viewing tube or tilting eyepiece tube, with or without eye-level risers. Three different diascopic stands with built-in power supplies may also be utilized with instrument, or standard stand that features low profile for increased clearance.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Refrigerated Incubator Shaker has a heavy gauge stainless steel frame, both refrigeration and heating capabilities, and a internal shaking platform, this Refrigerated incubator is fully capable of handling just about any sample parameters. The internal Cabinet of the 4230 is composed of sturdy heavy gauge stainless steel and has a double paned glass window on the outside to allow internal sample viewing. The cabinet contains two adjustable stainless steel shelves and a fluorescent light for improved visibility. The 4230 also includes an internal AC receptacle for the sole purpose of the powering of internal devices. The built in shaker features an audible and visible alarm, control, display, timer and other onboard installations. The internal shaker drive is a triple eccentric counter balanced drive with 9 sealed for life ball bearings and has a motion of � circular standard. The rpm range is between 25 and 400 non stacked, and 25-300 stacked. The onboard timer has a time range of up to 99.9 hours setable in 0.1 hours. The temperature of the 4230 ranges from 20C below ambient with a minimum of 4C to maximum of 75C for 50 Hz units or 80C for 60 Hz units. Temperature alarms provide indication when temperature deviates > 1.0C

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

THIS RESOURCE IS NO LONGER IN SERVICE. Documented on April 10, 2024. Professional 135/IX240 film scanner is a scanner that satisfies the need for quality and speed. 4,000-dpi true optical-resolution scanning,16-bit A/D converter featuring 16-/8-bit output for crisp, color-true images. Exclusive Scanner Nikkor ED high-performance lens elements for reduced color aberration and minimized image distortion. Proprietary LED illumination technology ensures consistently accurate color reproduction. Amazingly fast scanning (approx. 20 seconds including image transfer to display) at 4,000 dpi Newly-developed, high-quality 2-line CCD sensor Improved image processing algorithm for significant boost in scan quality of color negative film Multi-sample scanning capability of up to 16 passes for faithful reproduction and smoother gradation Quick AF & Quick Preview enhance operability and High-speed USB 2.0 interface for fast, easy image transfer Compatible with various film formats (35mm [135], IX240, etc.) Enhanced Color Management System for higher precision, in compliance with ICC (International Color Consortium) version 4 standards.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Benchtop fluorometer that can be used for the quantitation of DNA, RNA, microRNA, and protein using the highly sensitive and accurate fluorescence-based Qubit quantitation assays. Additionally, Ion Sphere Particle quality can be evaluated on the Qubit 3.0 Fluorometer using the Ion Sphere Quality Control Kit prior to performing a sequencing run on the Ion Personal Genome Machine (PGM) Sequencer. You can also use the Qubit 3.0 Fluorometer to directly measure the fluorescence of samples or to create new assay(s) using the MyQubit software pre-programmed into the instrument.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Malvern Panalytical NanoSight NS500 instrument provides an easy-to-use, reproducible platform for nanoparticle characterization. The NS500 provides detailed and analysis of the size distribution and concentration of all types of nanoparticles from 10nm to 2000nm in diameter, depending on the instrument configuration and sample type being analyzed. Single particle zeta potential measurements on the NS500 provide inherent high resolution zeta distributions which can be measured simultaneously with other NTA measurements parameters like size, particle concentration and can even operate whilst in fluorescence mode.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Full-spectrum, UV-Vis spectrophotometer used to quantify and assess purity of DNA, RNA, Protein and more.NanoDrop 2000c combines micro-volume pedestal technology and cuvette capability in single instrument.Provides expanded measurement options for all types of samples.Provides broader concentration range for measuring very low concentrations and very high concentrations. Cuvette capability allows for kinetics (time or time/temperature studies) and cell culture (OD 600) measurements.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

VersaXRM-500 from Xradia VersaXRM family is the latest generation of 3D X-ray microscopy (XRM) solutions optimized for non-destructive micro tomography. The VersaXRM-500 advances industry and science with a versatile combination of world-leading resolution and contrast, sample flexibility and the large working distance required to address emerging research challenges. The system's source technology and high resolution detector provide unmatched sub-micron resolution, even for large samples.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Multidetection microplate readers with dualmonochromators, dual-mode cuvette ports, and top reading capability. Detection modalities include absorbance (UV-Vis Abs) and fluorescence intensity (FI). Endpoint, kinetic, spectrum and area-well scanning read types and the PathCheck Sensor allow homogeneous and heterogeneous microplate assays to be performed in one flexible system. SpectraMax M2 readers provide for easy conversion and optimization of very-low-throughput to medium-high-throughput assays, faster, more precise results and reagent savings. In addition, combined absorbance and fluorescence intensity assays can be run by issuing a single read command.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Cryogenic tank for Specimen Sample Storage.This item includes the XC 47/11-6 dewar, cork/cover, and (6) 11" hanging round canisters. All other accessories sold separately. MVE XC Series tanks have capacities ranging from 700-5000 straws and 210 to over 1000 vials. .

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Conserve energy with Thermo Scientific MSC Advantage Class II Biological Safety Cabinets, which combine design and value with energy efficiency. Units feature 60 percent less energy consumption and heat output and cabinets are certified to EN 12469 safety standard.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

QuickPlex instrument is the newest multiplexing instrument from MSD, offering access to high-performance, electrochemiluminescence immunoassays. This compact system has been engineered for reliability, ease of use, and low cost of ownership. The combination of rapid read times and the ability to perform multiple, simultaneous tests on a single sample increases productivity, saves sample, and delivers results quickly. The QuickPlex has a wide menu of commercially available assay kits and a full line of components and reagents for developing your own assays.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Microplate reader from Molecular Devices provides everything needed to measure absorbance in the visible range, including temperature control, a robotics-compatible interface and SoftMax Pro Data Acquisition and Analysis Software.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

General purpose imager that delivers the speed typical of laser scanners on both 1D and 2D barcodes, accommodating 2D barcodes without sacrificing performance. Users never need to take time to align the barcode with the scanner or pause between scans. Since the DS4208 can scan barcodes printed on paper labels or on mobile phone displays, users can drive revenue by attracting the millions of customers who are using their cell phones to better manage their lives. Retailers can accommodate customers who download mobile coupons, mobile loyalty cards and more. Quick service restaurants can accept mobile coupons at the register. Hotels can allow guests to use electronic loyalty cards stored on their cell phones, eliminating the need to carry physical cards. And since theaters, theme parks and stadiums can scan mobile tickets as easily as a paper ticket, they can offer customers an added convenience: paperless ticketing.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Sample disruption instrument that can homogenize, grind, or lyse biological samples. Samples are added to individual lysing matrix tubes and shaken in tridimensional motion.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth