Curator Dashboard

Electrical failure analysis system for semiconductors that offers transistor probing for electrical characterization and fault localization in support of semiconductor technology development, yield engineering and device reliability improvement.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

LX-60 Specimen Radiography System is best for imaging larger animals and more dense specimens, due to its cabinet size and energy range of up to 60 kV. The system's large 12 cm x 12 cm camera offers 10 lp/mm spatial resolution. Magnification allows for spatial resolution of up to 60 lp/mm. The 10-12 �m typical focal spot and up to 6X additional geometric magnification provide ultra high-contrast and high spatial resolution images. If a larger field of view is required, the LX-60 can be used with a CR plate and small, upright CR reader to obtain a field of view up to 10� x 12� (25.4 cm x 30.5 cm).

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Microscope that features 200 kV XFEG optics and ensures a robust and contamination-free pathway throughout the entire workflow, from sample preparation and optimization to image acquisition and data processing.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Sample preparation workflow that is used for transmission electron microscopy (TEM) analysis.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Nanoprobing platform that provides electrical characterization and fault isolation capabilities for process development, device design debug, and failure analysis.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Sample preparation tool used for the preparation of thin, electron transparent lamellas for high resolution cryo electron tomography or MicroED of micro crystals.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Scanning electron microscope that provides a sub-nanometer or all-around nanometer resolution performance on materials spanning from catalysts, powders, nanoparticles, and bulk magnetic samples to nanodevices.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

MX-20 Cabinet X-ray System is utilized to produce highly detailed radiographs of seed and grain to inspect for viability, infestation, damage or contamination. The system is available with either our large 12 cm x 12 cm DC-12 camera or our smaller, less expensive 5 cm x 5 cm DC-5 camera. Both provide 10 lp/mm spatial resolution in contact mode. Magnification allows for spatial resolution of up to 50 lp/mm. The 20 �m nominal focal spot and up to 5X additional geometric magnification provide ultra high-contrast and high spatial resolution images. If a larger field of view is required, the MX-20 can be used with a CR plate and small, upright CR reader to obtain a field of view up to 10� x 12�.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Biological shaker with heavy-duty drives that provide long life and quiet operation under moderate loads and at speeds up to 400 rpm.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Benchtop concentrator that provides vacuum concentration of DNA and RNA, nucleotides, proteins and other liquid or wet samples. Coated lid provides chemical resistance against aggressive acids and organic solvents, like TFA and DMSO.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

IncuCyte ZOOM system is a live-cell imaging and analysis platform that enables automated quantification of cell behavior over time (from hours to weeks) by automatically gathering and analyzing images around the clock. The system provides insight into active biological processes in real-time which is not possible using single-point and end-point measurements. The system resides within the controlled environment of a standard cell incubator. All imaging is completely non-invasive and non-perturbing to cell health. The system can process multiple plates, flasks and dishes in parallel and does not depend on shuttling plates into and out of the incubator.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Automated pipetting workstation that automates multichannel pipetting, with reproducibility of results from cell based assays, ELISA, cell seeding, nucleic acid quantification, plate reformatting, or other applications.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Microscope accessory that is suited for injecting small to intermediate volumes, up to 100 pL, featuring wide range of functionality, simple operation and built in compressor to independently deliver required pressure. Ideal for injecting aqueous solutions into adherent cells and suspension cells.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

THIS RESOURCE IS NO LONGER IN SERVICE. Documented on November 14,2023. Eppendorf's electronic microinjectors FemtoJet 4i and FemtoJet 4x with their operation menu and a range of functionalities are perfectly suited for injecting small to intermediate volumes. With a built-in compressor, the FemtoJet 4i is the tool of choice for injecting aqueous solutions into adherent cells and suspension cells. If your research demands injecting volumes greater than 100 pL and/or longer series at higher pressures, FemtoJet 4x with its external pressure supply (not included) delivers the precise and continuous pressure required. Featuring the same quality design and compatibility features as the FemtoJet 4i, the FemtoJet 4x is the "heavy duty" device for those more demanding applications. Both the FemtoJet 4i and FemtoJet 4x, form the system with Eppendorf micromanipulators, yet they integrate just as easily with non-Eppendorf micromanipulation systems. The electronic connection between FemtoJet 4i or 4x and TransferMan 4r or InjectMan 4 guarantees simple, rapid and reproducible microinjections into cells, simplifying your daily work and speeding up your workflow. The FemtoJet 4i/ 4x injectors are for research use only.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Automated pipetting workstation that allows walk away automation of purification protocols that rely on vacuum filtration performing applications, such as nucleic acid purification or solid phase extraction away from workbench.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Automated pipetting workstation that includes a proprietary module to mix, heat or cool samples and reagents. The module can be loaded and unloaded with the gripper and pipetting to the mixer is possible before and after mixing steps.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Automated pipetting workstation that combines automated liquid handling and software features with accessories and consumables for Next Generation Sequencing library preparation and NGS kit flexibility.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Centrifuge 5804/5804 R is a high speed centrifuge for medium capacity needs. It allows for molecular applications in tubes up to 250 mL and offers additional swing,bucket and fixed,angle rotors as well as deepwell plate capacity for increased versatility. Eppendorf Centrifuge 5804/5804 R with its renowned quality and reliability offers you the most cost efficient solution for your medium throughput applications,now and in the future. It allows for molecular applications in tubes up to 250 mL and offers additional swing-bucket and fixed-angle rotors as well as deepwell plate capacity for increased versatility.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Automated pipetting workstation that combines magnetic finger module and ThermoMixer to facilitate magnetic bead separation, mixing, and temperature control in one deck position.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Automated pipetting workstation that is used for low throughput Next Generation Sequencing library preparation of up to 24 samples.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth