Curator Dashboard

Monochromated field emitter that produces high resolution high contrast images due to the Zeiss proprietary electron gun monochromator (MC) and Kohler illumination system. The monochromator enables the operator to reduce the energy width of primary electrons to less than 0.2 eV and thereby allows for highest resolution in Electron Energy Loss Spectroscopy (EELS).

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Light sheet fluorescence microscope for the imaging of large cleared specimens. Lightsheet Z.1 with Clr Plan-Apochromat 20x/1.0 Corr nd=1.38 is used to perform experiments with tissue cleared by Scale medium (Hama et al, Nat Neurosci. 2011), which has a refractive index of n=1.38.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Upright microscopy imaging platform for complex research that is optimized for light transmission and extremely high contrast fluorescence imaging. This complete system comes fully configured for best performance, range and functionality.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Computed tomography system with dual tube configuration for use with a wide variety of material types and parts size.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Visible confocal microscope that acquires the X dimension simultaneously on a line CCD detector while scanning only in the Y dimension. This allows users to increase the speed of image acquisition compared to traditional confocal systems. This system is equipped with two fluorescence detectors and 4 lasers lines at 405nm, 488nm, 561nm and 633nm. It is capable of scanning over 120 FPS for a large field of view.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Inverted microscope that is used for the examination of cell and tissue culture of sediments in culture flasks, Petri dishes, microtiter plates, etc. in transmitted and reflected light. It hass attachment possibilities for various tools (micromanipulation), different light sources, temperature control devices., THIS RESOURCE IS NO LONGER IN SERVICE. Documented on September 16,2025.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Electron microscope with pulsed laser beam that creates images in high resolution in the nanometre range. This miscroscope allows the user to investigate your samples with X-ray analysis, rework interesting sample positions, and analyze non-conducting material and complex geometries.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Barcode label printer with 203 and 300 dpi print resolutions, multiple interface options (including serial, parallel, USB, Ethernet and 802.11b wireless connections). It has side-loading design and an 8" label roll capacity.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

THIS RESOURCE IS NO LONGER IN SERVICE. Documented on April 12, 2024. Transmission electron research microscope with accelerating voltages of 120 and 200kV and has magnification from 80X to 1,000,000X with resolution line of 0.12nm.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Cryogenic Crystal Cooler is a self-contained apparatus designed for cooling crystals to a temperature within the range of -180C to 4C. The X-stream 2000 system takes room air, compresses it, and removes the impurities from it to produce clean, dry nitrogen. This gas is then cooled to nearly -196C, and then rewarmed to the desired temperature

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

X ray inspection system for automatic analysis of smallest and most demanding features within 3D IC, MEMS and sensors.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Computed tomography system available in single or dual tube configuration. It can be used for small to medium sized parts inspection in automotive, electronics, aviation, and material science industries.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

X ray inspection system has been developed to enable automated analysis for flaws in semi-conductors. Flaws can be found on wafer, on substrate, in strip in sub assembly or in final device.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Spinning disk confocal micrscope for observation of various life processes in living samples in real time, minimal photo bleaching and photo toxicity.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

X-ray machine for inspection of SMT, semiconductor, and laboratory assembly applications.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Thermal transfer barcode printer with label, receipt and tag-handling capabilities that connects via USB, serial, or parallel port.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Multi Angle Light Scattering Detector that measures multi angle light scattering and reports results weight average molecular weight Mw and rms radius Rg in real time.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

Computed tomography system for 3D inspection results at high resolution. In electronics and material science industries can use it for R&D, defect analysis, process monitoring, or CT metrology.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

X-ray inspection system for SMT, semiconductor, and laboratory assembly applications.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth

In vivo imaging system that combines 2D optical and 3D optical tomography in one platform. The system can be used for preclinical imaging research and development best for non-invasive longitudinal monitoring of disease progression, cell trafficking and gene expression patterns in living animals.

• Resource
• SciCrunch
• 6 years ago - submitted by Edyta Vieth