The currently available reverse shoulder arthroplasty (RSA) designs can be classified into medial glenoid/medial humerus (MGMH), lateral glenoid/medial humerus (LGMH), and medial glenoid/lateral humerus (MGLH) prosthesis designs. The purpose of this study was to radiologically analyze the effect of different RSA designs on humeral position following RSA.

The extra-articular distal humerus plate (EADHP) has been widely used for surgical treatment of distal humerus shaft fracture (DHSF). However, the surgical approach, fixation methods, and implant positions of the EADHP remain controversial owing to iatrogenic radial nerve injury and complaints such as skin irritation related to the plate. Anterior plating with a modified (upside-down application) proximal humerus locking plate (PHILOS) has been proposed as an alternative, However, research on its biomechanical performance remain insufficient and were mostly based on retrospective studies. This study quantitatively compared and evaluated the biomechanical performance between posterior plating with the EADHP and anterior plating with a modified PHILOS using finite element analysis (FEA). The FEA simulation results that both the EADHP and PHILOS had adequate biomechanical performance and stability under axial, bending, and varus force load conditions. The PHILOS has a fixed stability comparable to that of the EADHP, and fixation was achieved using only four locking screws within a fixed range of 30 mm just above the olecranon fossa. The results show that the PHILOS could be an option for the fixation of a DHSF when considering the dissection range and complaints (e.g. skin irritation) associated with the EADHP.

Impacted valgus fractures of the proximal humerus are considered to be a special type fracture, since impaction of the humeral head on the metaphysis with maintenance of the posteromedial periosteum improves the prognosis regarding occurrences of avascular necrosis. This characteristic can also facilitate the reduction maneuver and increase the consolidation rate of these fractures, even in more complex cases. The studies included were obtained by searching the Bireme, Medline, PubMed, Cochrane Library and Google Scholar databases for those published between 1991 and 2013. The objective of this study was to identify the most common definitions, classifications and treatment methods used for these fractures in the orthopedic medical literature.

Distal humerus fractures (DHFs) constitute one-third of elbow fractures approximately. In this study, we aim to define and analyze the fracture lines and morphological features of DHFs using mapping technique.

Proximal humerus fractures constitute a significant percentage of fragility fractures. The growing use of locking plate has helped treat this problem, but at the same time has brought about complications. Past systematic reviews have documented these complications, however a large number of recent studies have been published since, reporting their own complication rates with different techniques. This study reviews the current complications associated with locking plate of proximal humerus fractures as well as methods to reduce them. A systematic review, following the PRISMA guidelines, was conducted in November 2013 and repeated in March 2015, using PubMed, Scopus, and Cochrane databases, to evaluate locking plate fixation (and complications) of traumatic proximal humerus fractures. Inclusion criteria included adults (>18 years), minimum of 12-month postoperative followup, articles within the last 5 years, and studies with >10 participants. Exclusion criteria included pathologic fractures, cadaveric studies, and nonhuman subjects. Eligible studies were graded using a quality scoring system. Articles with a minimum of 7/10 score were included and assessed regarding their level of evidence per the Journal of Bone and Joint Surgery and Centre for Evidence-Based Medicine guidelines. The initial query identified 51,206 articles from multiple databases. These records were thoroughly screened and resulted in 57 articles, consisting of seven Level 1, three Level 2, 10 Level 3, and 37 Level 4 studies, totaling 3422 proximal humerus fractures treated with locking plates. Intraarticular screw penetration was the most reported complication (9.5%), followed by varus collapse (6.8%), subacromial impingement (5.0%), avascular necrosis (4.6%), adhesive capsulitis (4.0%), nonunion (1.5%), and deep infection (1.4%). Reoperation occurred at a rate of 13.8%. Collapse at the fracture site contributed to a majority of the implant-related complications, which in turn were the main reasons for reoperation. The authors of these studies discussed different techniques that could be used to address these issues. Expanding use of locking plate in the proximal humerus fractures leads to improvements and advancements in surgical technique. Further research is necessary to outline indications to decrease complications, further.

Bone quality influences humeral implant selection for shoulder arthroplasty. However, little is known about how well bone near the humeral resection represents more distal cancellous bone. This investigation aimed to quantify the correlations between the apparent density of sites near the humeral head resection plane and cancellous sites throughout the metaphysis.

No abstract available

Intra-cortical bone remodelling is a cell-driven process that replaces existing bone tissue with new bone tissue in the bone cortex, leaving behind histological features called secondary osteons. While the scaling of bone dimensions on a macroscopic scale is well known, less is known about how the spatial dimensions of secondary osteons vary in relation to the adult body size of the species. We measured the cross-sectional area of individual intact secondary osteons and their central Haversian canals in transverse sections from 40 stylopodal bones of 39 mammalian species (body mass 0.3-21 000 kg). Scaling analysis of our data shows that mean osteonal resorption area (negative allometry, exponent 0.23,R2 0.54,p<0.005) and Haversian canal area (negative allometry, exponent 0.31,R2 0.45,p<0.005) are significantly related to body mass, independent of phylogeny. This study is the most comprehensive of its kind to date, and allows us to describe overall trends in the scaling behaviour of secondary osteon dimensions, supporting the inference that the osteonal resorption area may be limited by the need to avoid fracture in smaller mammalian species, but the need to maintain osteocyte viability in larger mammalian species.

Humeral fractures have an incidence of 3-5% and a bimodal age distribution. They may occur in young patients after highenergy traumas or in elderly osteoporotic patients after low-energy injuries. In nondisplaced fractures or in elderly patients, humeral fractures are treated by conservative methods. Open reduction and internal fixation (ORIF) should be the treatment of choice in case of multi-fragmentary fractures associated with radial nerve palsy or not. ORIF is usually regarded as the gold standard treatment, but, depending on the different types of fracture, the surgical approach can change. In this review, we compare results and complication rates between lateral and posterior surgical approaches in the management of extraarticular distal humeral shaft fractures. An internet-based literature research was performed on Pubmed, Google Scholars and Cochrane Library. 265 patients were enrolled: 148 were treated by lateral or antero-lateral approach, while 117 by posterior or postero-lateral approach. The literature shows that no differences between the posterior and lateral approach exist. Certainly, the posterior approach offers undoubted advantages in terms of exposure of the fracture and visualization of the radial nerve. In our opinion, the posterior approach may also allow better management of complex and multi-fragmentary fractures.

Despite numerous available treatment strategies, the management of complex proximal humeral fractures remains demanding. Impaired bone quality and considerable comorbidities pose special challenges in the growing aging population. Complications after operative treatment are frequent, in particular loss of reduction with varus malalignment and subsequent screw cutout. Locking plate fixation has become a standard in stabilizing these fractures, but surgical revision rates of up to 25% stagnate at high levels. Therefore, it seems of utmost importance to select the right treatment for the right patient. This article provides an overview of available classification systems, indications for operative treatment, important pathoanatomic principles, and latest surgical strategies in locking plate fixation. The importance of correct reduction of the medial cortices, the use of calcar screws, augmentation with bone cement, double-plate fixation, and auxiliary intramedullary bone graft stabilization are discussed in detail.

Background Supracondylar humerus fractures (SCH) are common upper extremity fractures in children and are usually treated by closed reduction and percutaneous pinning. Post-operative management may cause complications, but the difference between cast and splint has not been closely investigated. Purpose Our objective was to compare casting and splinting of SCH fractures with respect to post-operative complications. Patients and methods We reviewed 1,146 pediatric SCH fractures that were reduced, percutaneously pinned, and immobilized by cast or splint. Open fractures, openly reduced fractures, and pre-operative neurological injuries were excluded. Over the course of immobilization, we noted if the initial cast or splint was maintained and if the patient returned due to complications. Results Post-operative casting was performed on 1,091 (95.2%) fractures and 55 (4.8%) were splinted. Age was a significant factor, increasing the likelihood of splinting by 12% with each year of age (p = 0.023). A total of 28 patients (2.4%) returned for unscheduled visits due to immobilization complaints, infection, and pain, but the rate difference between cast and splint was negligible. Reoperation was required for five patients (0.4%), and more likely for splinted fractures (p = 0.021). After controlling for age, splinting was still associated with reoperation (OR: 15.1, p = 0.004). Conclusions Although complications inevitably exist, both casting and splinting are effective immobilization methods. Both resulted in few complications such as post-operative discomfort, pain, infection, loss of reduction, or damage. It was difficult to evaluate significance with few splinted cases, but considering no major differences between splinted and casted fractures, clinicians should consider splinting to reduce the cost associated with casting.

The presence of soft tissue injury in pediatric supracondylar humerus fractures (SCHFs) has been shown to be an independent predictor of any neurovascular injury. Potentially expanding this concept, the specific neurovascular structure injured around the elbow is thought to be dependent upon the direction and magnitude of fracture displacement and subsequent soft tissue injury. Therefore, it was hypothesized that the bruise location following SCHF is indicative of the anatomic location of maximal soft tissue injury and therefore is a specific prognosticator of which neurovascular structure may be injured.

This study aimed to determine the morphological differences of three-part proximal humerus fractures, the group in which plate screw fixation is most frequently used, and to evaluate the functional and radiological results of the methods applied for different subgroups.

Proximal humerus fractures are common injuries of the elderly. Different treatment options, depending on fracture complexity and stability, have been recommended in the literature. Particularly for varus displaced fractures with a lack of medial support, and patients suffering from osteoporosis, structural allografts can be used to enhance the stability of the construct. An individually shaped allograft has been suggested in the literature and investigated in a clinical setting. However, biomechanical properties have yet to be evaluated.

Biomechanical stability assessment of 3 different constructs for proximal fixation of a locking compression plate (LCP) in treating a Worland type C periprosthetic fracture after total shoulder arthroplasty.

anaDistal humerus fractures (DHFs) are challenging to treat due to the locally complex osseous and soft tissue anatomy. Adequate exposure of the articular surface of the distal humerus is crucial when performing an anatomical reconstruction of the elbow. Even though "triceps-on" approaches are gaining popularity, one of the most commonly used surgical treatments for DHF is olecranon osteotomy. The incidence of complications related to this approach is unclear. This review was performed to assess the type and frequency of complications that occur with the olecranon osteotomy approach in the treatment of DHF. A literature search was conducted in the PubMed/Medline, Embase, and Cochrane Library digital databases up to February 2020. Only English articles describing complications of olecranon osteotomy in the treatment of DHF were included. Data on patient and surgical characteristics and complications were extracted. Statistical analysis was performed using SPSS. A total of 41 articles describing 1,700 osteotomies were included, and a total of 447 complications were reported. Of these 447 complications, wound infections occurred in 4.2% of osteotomies, of which 1.4% were deep infections and 2.8% were superficial. Problems related with union occurred in 3.7% of osteotomies, 2% of which represented non-union and 1.7% delayed union. The high risk of complications in olecranon osteotomy must be considered in the decision to perform this procedure in the treatment of DHF.

Proximal humeral fractures are with an incidence of 4-5 % the third most common fractures in the elderly. In 20 % of humeral fractures there is an indication for surgical treatment according to the modified Neer-Criteria. A secondary varus dislocation of the head fragment and cutting-out are the most common complications of angle stable locking plates in AO11-A3 fractures of the elderly. One possibility to increase the stability of the screw-bone-interface is the cement augmentation of the screw tips. A second is the use of a multiplanar angle stablentramedullary nail that might provide better biomechanical properties after fixation of 2-part-fractures. A comparison of these two treatment options augmented locking plate versus multiplanar angle stable locking nail in 2-part surgical neck fractures of the proximal humerus has not been carried out up to now.

Two surgical approaches, an anterolateral and a posterolateral approach, have been advocated for lateral condylar fractures (LCFs) of the humerus in children. The purpose of this study was to evaluate the radiographic and clinical outcomes of the 2 surgical approaches.

To analyze the clinical efficacy of K-wire placement guided technology in paediatric supracondylar humerus fractures.

Treatment of proximal humerus fractures with locking plates is associated with complications. We aimed to compare the biomechanical effects of removing screws and blade of a fixed angle locking plate and hybrid blade plate, on a two-part fracture model.