This service exclusively searches for literature that cites resources. Please be aware that the total number of searchable documents is limited to those containing RRIDs and does not include all open-access literature.
In one of our previously published articles, we reported the synthesis, spectroscopic, thermal, and catalytic properties of four new M(II) acetate (where M = Co, Ni, Cu, Zn) complexes with imidazole. Presented compounds exhibited activity in the reaction on catalytic oxidation of styrene. In this study we have synthesized and investigated properties of analogous compounds, however using formates or propionates of mentioned metal cations instead of acetates. Such an approach allowed us to draw valuable conclusions concerning the relationship between the carbon chain length and catalytic activity, which is an important factor for catalyst modeling. Synthesized compounds have been thoroughly investigated using appropriate analytic techniques: AAS (Atomic Absorption Spectrometry), FTIR (Fourier-Transform Infrared Spectroscopy), and TGA (Thermogravimetric Analysis). Catalytic properties have been studied under the same previous conditions, using GC-FID (GC-chromatograph equipped with FID detector).
Metal-hydride anions of main group elements, such as BaH3 - and InH4 -, were generated by dissociating formate adducts of the respective metal formates. Upon activation, these adducts fragment by formate-ion ejection or by decarboxylation. For adducts of alkali-metal formates, the formate-ion ejection is the preferred pathway, whereas for those of alkaline-earth and group 13-15 metals, the expulsion of CO2 is the more favorable pathway. Decarboxylation is deemed to yield a metal-hydrogen bond presumably by a hydride transfer to the metal atom. For example, the decarboxylation of Al(η-OCOH)4 - and Ga(η-OCOH)4 - generated AlH4 - and GaH4 -, respectively. The initial fragment-ion with a H-M bond formed in this way from adducts of the heavier metals of group 13 (Ga, In, and Tl) undergo a unimolecular reductive elimination, ascribable to the "inert-pair" effect, to lower the metal-ion oxidation state from +3 to +1. As group 13 is descended, the tendency for this reductive elimination process increases. PbH3 -, generated from the formate adduct of lead formate, reductively eliminated H2 to form PbH-, in which Pb is in oxidation state zero. In the energy-minimized structure [H-Pb(η2-H2)]-, proposed as an intermediate for the process, a H2 molecule is coordinated with PbH- as a dihapto ligand. The formate adducts of strontium and barium produce monoleptic ions such as [M(0)(η2-O2CH)1]-, in which the formate ion is chelated to a neutral metal atom. The bismuth formate adduct undergoes a double reductive elimination process whereby the oxidation state of Bi is reduced from +3 to +1 and then to -1. Upon activation, the initially formed [H-Bi-H]- ion transforms to an anionic η2-H2 complex, which eliminates dihydrogen to form the bismuthide anion (Bi-).
Echinoderms display a vast array of pigmentation and patterning in larval and adult life stages. This coloration is thought to be important for immune defense and camouflage. However, neither the cellular nor molecular mechanism that regulates this complex coloration in the adult is known. Here we knocked out three different genes thought to be involved in the pigmentation pathway(s) of larvae and grew the embryos to adulthood. The genes tested were polyketide synthase (PKS), Flavin-dependent monooxygenase family 3 (FMO3) and glial cells missing (GCM). We found that disabling of the PKS gene at fertilization resulted in albinism throughout all life stages and throughout all cells and tissues of this animal, including the immune cells of the coelomocytes. We also learned that FMO3 is an essential modifier of the polyketide. FMO3 activity is essential for larval pigmentation, but in juveniles and adults, loss of FMO3 activity resulted in the animal becoming pastel purple. Linking the LC-MS analysis of this modified pigment to a naturally purple animal suggested a conserved echinochrome profile yielding a pastel purple. We interpret this result as FMO3 modifies the parent polyketide to contribute to the normal brown/green color of the animal, and that in its absence, other biochemical modifications are revealed, perhaps by other members of the large FMO family in this animal. The FMO modularity revealed here may be important in the evolutionary changes between species and for different immune challenges. We also learned that glial cells missing (GCM), a key transcription factor of the endomesoderm gene regulatory network of embryos in the sea urchin, is required for pigmentation throughout the life stages of this sea urchin, but surprisingly, is not essential for larval development, metamorphosis, or maintenance of adulthood. Mosaic knockout of either PKS or GCM revealed spatial lineage commitment in the transition from bilaterality of the larva to a pentaradial body plan of the adult. The cellular lineages identified by pigment presence or absence (wild-type or knock-out lineages, respectively) followed a strict oral/aboral profile. No circumferential segments were seen and instead we observed 10-fold symmetry in the segments of pigment expression. This suggests that the adult lineage commitments in the five outgrowths of the hydropore in the larva are early, complete, fixed, and each bilaterally symmetric. Overall, these results suggest that pigmentation of this animal is genetically determined and dependent on a population of pigment stem cells that are set-aside in a sub-region of each outgrowth of the pentaradial adult rudiment prior to metamorphosis. This study reveals the complex chemistry of pigment applicable to many organisms, and further, provides an insight into the key transitions from bilateral to pentaradial body plans unique to echinoderms.
The Baeyer-Villiger Oxidation (BVO) of ketones and aldehydes produce lactones and formates, while aerobic carboxylation of aldehydes manufactures carboxylic acids, both having high added value. This work prepared a series of Al-containing silicates modified with organic ligands and SnO2 nanoparticles, which were then employed as catalyst in BVO and carboxylation. Characterizations revealed the morphology of the synthesized catalyst was changed from micron-sized thin sheets to smaller blocks, and then to uniform nanoparticles (size of 50 nm) having the doped SnO2 nanoparticles with a size of 29 nm. All catalysts showed high BET surface areas featuring silt-like mesopores. In determining the priority of BVO and carboxylation, an influence evaluation of the parameters showed the order to be substrate > oxidant > solvent > catalyst. Cyclic aliphatic ketones were suitable for BVO, but linear aliphatic and aromatic aldehydes for carboxylation. Coordination of (S)-binaphthol or doping of Sn into catalyst showed little influence on BVO under m-CPBA, but the Sn-doped catalyst largely increased BVO under (NH4)2S2O8 and H2O2. Calculations revealed that the catalyst containing both Al and Sn could give BVO intermediates lower energies than the Sn-beta zeolite model. The present system exhibited merits including wider substrate scope, innocuous catalytic metal, greener oxidant, as well as lower catalyst cost.
Upon mass selection and ion activation under mass spectrometric conditions, gaseous formate adducts of many metal formates undergo decarboxylation and form product ions that bear metal-hydrogen bonds. Fortuitously, we noted that negative-ion spectra of several such formate adducts showed many peaks that could not be rationalized by the conventional fragmentation pathways attributed to the precursor ion. Subsequent experimentation proved that these enigmatic peaks are due to an ion-molecule reaction that takes place between traces of adventitious water vapor in the collision gas and the in situ formed product anions bearing metal-hydrogen bonds, generated by the fragmentation of the formate adducts. Results show that metal-hydrogen bonds of the group 2 elements are particularly susceptible to this reaction. For example, in the product-ion spectrum of [Sr(η2-O2CH)3]-, the peak at m/z 91 for SrH3 - was accompanied by three peaks at higher m/z ratios. These peaks, at m/z 107, 123, and 139, represented SrH2(OH)1 -, SrH1(OH)2 -, and Sr(OH)3 -, respectively. These satellite peaks, which were separated by 16 m/z units, were attributed to adducts formed due to the high affinity of gas-phase anions bearing metal-hydrogen bonds to water. Although undesired, these peaks are diagnostically useful to determine the number of metal-hydrogen bonds present in a precursor ion. Even though the peaks were less pronounced, analogous reactions were noted from the adducts of the group 1 elements as well. Moreover, Gibbs free energy values computed for the interaction of [H-Mg(η2-O2CH)2]- with water to form [HO-Mg(η2-OCOH)2]- and H2 indicated that this is an exergonic reaction.
Welcome to the FDI Lab - SciCrunch.org Resources search. From here you can search through a compilation of resources used by FDI Lab - SciCrunch.org and see how data is organized within our community.
You are currently on the Community Resources tab looking through categories and sources that FDI Lab - SciCrunch.org has compiled. You can navigate through those categories from here or change to a different tab to execute your search through. Each tab gives a different perspective on data.
If you have an account on FDI Lab - SciCrunch.org then you can log in from here to get additional features in FDI Lab - SciCrunch.org such as Collections, Saved Searches, and managing Resources.
Here is the search term that is being executed, you can type in anything you want to search for. Some tips to help searching:
You can save any searches you perform for quick access to later from here.
We recognized your search term and included synonyms and inferred terms along side your term to help get the data you are looking for.
If you are logged into FDI Lab - SciCrunch.org you can add data records to your collections to create custom spreadsheets across multiple sources of data.
Here are the facets that you can filter your papers by.
From here we'll present any options for the literature, such as exporting your current results.
If you have any further questions please check out our FAQs Page to ask questions and see our tutorials. Click this button to view this tutorial again.
Year:
Count: